Month: November 2020

(R)-2′-amino-[1,1′-binaphthalen]-2-ol, cas is 137848-28-3, it is a common heterocyclic compound, the chiral-catalyst compound, its synthesis route is as follows.,137848-28-3

General procedure: Modified method [69]. Salicylaldehyde (1.22 g, 10.0 mmol) was mixed with (R)-2-amino-2′-hydroxy-1,1′-binaphthyl (2.85 g,10.0 mmol) in dry toluene (50 mL). A few 4 A molecular sieves were added, and the solution was warmed up to 70 C and kept for two days at this temperature. The solution was filtered, and the filtrate was concentrated to 10 mL. Yellow microcrystals 1H2 were isolated when this solution was kept at -20 C for two days. Yield: 3.31 g (85%). M.p.: 120-122 C. 1H NMR (C6D6): d 12.45 (s, 1H, OH), 8.23 (s, 1H, CHN), 7.83 (m, 2H, aryl), 7.74 (m, 2H,aryl), 7.57 (d, J = 8.4 Hz, 1H, aryl), 7.36 (m, 1H, aryl), 7.28 (m, 2H, aryl), 7.17 (m, 2H, aryl), 7.11 (m, 2H, aryl), 6.96-6.83 (m,3H, aryl), 6.62 (t, J = 7.2 Hz, 1H, aryl), 4.73 (s, 1H OH). These spectroscopicdata were in agreement with those reported in the literature [69].

With the rapid development of chemical substances, we look forward to future research findings about (R)-2′-amino-[1,1′-binaphthalen]-2-ol

Reference£º
Article; Chen, Liang; Zhao, Ning; Wang, Qiuwen; Hou, Guohua; Song, Haibin; Zi, Guofu; Inorganica Chimica Acta; vol. 402; (2013); p. 140 – 155;,
Chiral Catalysts
Chiral catalysts – SlideShare

Name is (S)-(1-Ethylpyrrolidin-2-yl)methanamine, as a common heterocyclic compound, it belongs to chiral-catalyst compound, and cas is 22795-99-9, its synthesis route is as follows.,22795-99-9

General procedure: 2-(7-Aza-1H-benzotriazole-1-yl)-1,1,3,3-tetramethyluronium hexafluorophosphate (HATU; 1.2 equivalents) was added to a solution of the corresponding alpha-methyl carboxylic acid (2) (1 equiv), the appropriate amine (1.5 equiv) and DIEA (2 equiv) in dry acetonitrile (10 mL) at room temperature under argon atmosphere. The reaction mixture was stirred at room temperature overnight. Solvent was evaporated under reduced pressure, and the crude product was purified using a Teledyne Isco Combiflash? Rf purification machine using 0-10percent CHCl3/methanol as eluent to provide the desired amides 3-59 in 68-95percent yields.

With the complex challenges of chemical substances, we look forward to future research findings about (S)-(1-Ethylpyrrolidin-2-yl)methanamine

Reference£º
Article; Mathew, Bini; Snowden, Timothy S.; Connelly, Michele C.; Guy, R. Kiplin; Reynolds, Robert C.; Bioorganic and Medicinal Chemistry Letters; vol. 28; 12; (2018); p. 2136 – 2142;,
Chiral Catalysts
Chiral catalysts – SlideShare

673-06-3, D-Phenylalanine is a chiral-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

673-06-3, A mixture of 44 mL of conc. HNO3 and 34.6 mL of conc. H2SO4 was added dropwise to a solution of 50 g (0.303 mol) of L(D)-phenylalanine in 150 mL of 85% H2SO4, pre-cooled to 10C. The reaction mixture was stirred for 3 hours at 8-10C, then the reaction mixture was adjusted to pH 6 by addition of NaOH aqueous solution. The precipitate was filtered off and dried. The reaction product was recrystallized from water. Yield 91% (2), 89% (2b). mp 240C (mp 239-241C [10]). IR spectrum nu, cm-1: 3294, 2889, 1701, 1620, 1535, 1443, 1350, 880, 864, 745, 698, 525. 1 NMR spectrum (DMSO-d6), delta, ppm: 2.90-4.00 m (5H, CH, CH2, NH2), 7.55 d (2Harom, 3J 8.5 Hz), 8.15 d (2Harom, 3J 8.5 Hz). 13 NMR spectrum (DMSO-d6), delta, ppm: 40.79 (2), 57.28 (), 128.15, 129.79, 145.41, 168.48 (arom), 172.84 (). Mass spectrum (ESI), m/z: 211.0713 [M + H]+. C9H10N2O4. Calculated M210.0641.

The synthetic route of 673-06-3 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Tolstyakov; Tolstobrova; Zarubina; Popova; Protas; Chuprun; Trifonov; Russian Journal of Organic Chemistry; vol. 52; 11; (2016); p. 1681 – 1685; Zh. Org. Khim.; vol. 52; 11; (2016); p. 1686 – 1690,5;,
Chiral Catalysts
Chiral catalysts – SlideShare

Name is [1,1′-Binaphthalene]-2,2′-diamine, as a common heterocyclic compound, it belongs to chiral-catalyst compound, and cas is 4488-22-6, its synthesis route is as follows.,4488-22-6

General procedure: In a typical experiment Pd(OAc)2 (5.6 mg, 0.025 mmol), triphenylphosphine (13.2 mg, 0.05 mmol), 17-iodo-5alpha-androsta-16-ene 1 (0.5 mmol), 2,2′-diamino-1,1′-binaphthalene 2 (varied from 1.0 mmol to 0.125 mmol) and triethylamine (0.5 mL) were dissolved in DMF (10 mL) under argon in a 100 mL three-necked flask equipped with a gas inlet, reflux condenser with a balloon (filled with argon) at the top. The atmosphere was changed to carbon monoxide. The reaction was conducted for the given reaction time upon stirring at 50 C and analysed by TLC. The mixture was then concentrated and evaporated to dryness. The residue was dissolved in chloroform (20 mL) and washed with water (3 20 mL), 5% hydrochloric acid (20 mL), saturated NaHCO3 (20 mL) and brine (20 mL). The organic phase was dried over Na2SO4, filtered and evaporated to give a solid material. All compounds were subjected to column chromatography (Silicagel 60 (Merck), 0.063-0.200 mm), EtOAc/CHCl3 or hexane/CHCl3 (the exact ratios are specified in Section 4.4 for each compound). 4.3. Characterisation of the products (Fig. 3) (Sax)-3: Yield: 410 mg (72%). Off-white yellow solid, mp 137-142 C; [Found: C, 84.55; H, 7.65; N, 4.70; C40H44N2O requires C,84.46; H, 7.80; N, 4.93]; Rf (5% EtOAc/CHCl3) 0.68. 1H NMR (CDCl3) delta: 8.94 (1H, d, 9.0 Hz, H-30), 8.03 (1H, d, 9.0 Hz, H-40), 7.94 (1H, d,8.2 Hz, H-50), 7.87 (1H, d, 8.5 Hz, H-300), 7.82 (1H, d, 7.5 Hz, H-400), 7.43 (1H, dt, 6.3 Hz, 1.6 Hz, H-60), 7.35 (1H, s, NH), 7.31 (1H, dt,8.5 Hz, 0.8 Hz, H-70), 7.29-7.26 (2H, m, H-600 , H-600), 7.23 (1H, dt,6.8 Hz, 1.1 Hz, H-700), 7.16 (1H, d, 8.7 Hz, H-80), 6.96 (1H, d, 8.2 Hz,H-800), 6.21 (1H, dd, 2.9 Hz, 1.5 Hz, H-16), 3.69 (2H, s, NH2), 2.05 (1H, ddd, 16.7 Hz, 6.5 Hz, 3.4 Hz, 15-CHaHb), 1.78 (1H, ddd,16.7 Hz, 11.9 Hz, 1.4 Hz, 15-CHaHb), 1.07-0.54 (23H, m, skeleton protons), 0.78 (3H, s, 19-CH3), 0.62 (3H, s, 18-CH3). 13C NMR (CDCl3) delta: 163.6, 150.4, 143.0, 140.0, 135.7, 133.8, 132.5. 131.1, 130.3, 129.3, 128.3, 128.2, 128.1, 127.5, 126.8, 125.3, 124.9, 123.6, 122.8, 120.4, 119.7, 118.1, 110.5, 56.8, 54.7, 47.2, 45.3, 38.4, 36.3, 34.2, 33.7, 31.8, 31.4, 29.0, 28.8, 26.8, 22.2, 20.5, 16.0, 12.1. IR (KBr, m(cm1)): 3440 (amide-NH), 3398 (NH2), 1665 (CON), 1620 (CC). MS m/z (rel int.): 569.4 (100, (M+H)+), 381 (9), MS/MS m/z (relint.): 551.4 (29), 285.2 (100). [alpha]D20 = 37.1 (c 1.34, CHCl3). (Rax)-3: Yield: 114 mg (20%). Off-white solid substance; [Found:C, 84.30; H, 7.66; N, 4.77; C40H44N2O requires C, 84.46; H, 7.80; N,4.93]; Rf (5% EtOAc/CHCl3) 0.72. 1H NMR (CDCl3) delta: 8.95 (1H, d,9.0 Hz, H-30), 8.03 (1H, d, 9.0 Hz, H-40), 7.93 (1H, d, 7.9 Hz, H-50), 7.87 (1H, d, 8.9 Hz, H-300), 7.82 (1H, d, 7.8 Hz, H-400), 7.43 (1H, dt,6.4 Hz, 1.2 Hz, H-60), 7.36 (1H, s, NH), 7.31 (1H, dt, 8.6 Hz, 0.8 Hz,H-70), 7.29-7.26 (2H, m, H-6”, H”), 7.23 (1H, dt, 6.9 Hz, 1.5 Hz,H-7”), 7.16 (1H, d, 8.5 Hz, H-8′), 6.96 (1H, d, 8.4 Hz, H-8”), 6.21 (1H, dd, 3.1 Hz, 1.5 Hz, H-16), 3.69 (2H, s, NH2), 2.05 (1H, ddd, 16.3 Hz, 6.4 Hz, 3.4 Hz, 15-CHaHb), 1.78 (1H, ddd, 16.6 Hz,11.7 Hz, 2.0 Hz, 15-CHaHb), 1.07-0.53 (23H, m, skeleton protons), 0.77 (3H, s, 19-CH3), 0.31 (3H, s, 18-CH3). 13C NMR (CDCl3) delta: 163.5, 150.4, 143.1, 140.2, 135.7, 133.8, 132.4, 131.1, 130.3, 129.3, 128.4, 128.3, 128.2, 127.5, 126.8, 125.3, 124.9, 123.6,122.8, 120.4, 119.7, 118.0, 110.6, 56.8, 54.8, 47.2, 45.2, 38.4, 36.3, 34.2, 33.7, 31.7, 31.4, 29.0, 28.8, 26.8, 22.2, 20.5, 15.5, 12.1. IR(KBr, m (cm1)): 3441 (amide-NH), 3396 (NH2), 1665 (CON), 1620 (CC). MS m/z (rel int.): 569.4 (100, (M+H)+), 381 (9), MS/MS m/z (rel int.): 551.4 (29), 285.2 (100). [alpha]D20 = +191.5 (c 0.914, CHCl3). (Sax)-4: Yield: 102 mg (12%). Beige solid substance; [Found: C,84.31; H, 8.35; N, 3.12; C60H72N2O2 requires C, 84.45; H, 8.51; N,3.28]; Rf (10% hexane/CHCl3) 0.69. 1H NMR (CDCl3) alpha: 8.94 (2H, d,9.2 Hz, H-3′), 8.08 (2H, d, 9.2 Hz, H-4′), 7.95 (2H, d, 8.2 Hz, H-5′),7.46 (2H, dt, 7.2 Hz, 0.9 Hz, H-6′), 7.35 (2H, dt, 7.2 Hz, 0.9 Hz, H-7′), 7.1 (2H, d, 9.3 Hz, H-8′), 7.13 (2H, s, NH), 6.05 (2H, dd, 3.1 Hz, 1.5 Hz, H-16), 2.02 (2H, ddd, 16.8 Hz, 6.4 Hz, 3.1 Hz, 15-CHaHb), 1.88 (2H, dd, 9.9 Hz, 3.1 Hz, 14-CH), 1.75 (2H, ddd, 16.8 Hz,11.7 Hz, 1.5 Hz, 15-CHaHb), 1.69-0.54 (44H, m, skeleton protons), 0.77 (6H, s, 19-CH3), 0.57 (6H, s, 18-CH3). 13C NMR (CDCl3) alpha: 163.6, 150.2, 140.0, 136.0, 135.2, 132.4, 131.3, 130.0, 128.2,127.5, 125.3, 124.9, 120.5, 118.1, 56.6, 54.8, 47.2, 45.4, 38.4, 36.3, 34.2, 33.6, 31.7, 31.4, 29.0, 28.8, 26.8, 22.1, 20.5, 16.1, 12.1. IR (KBr, m (cm1)): 3408 (amide-NH), 1677 (CON), 1621 (CC). MS m/z (rel int.): 853.6 ((M+H)+); 875.6 ((M+Na)+), 891.5 ((M+K)+). [alpha]D20 = +12.0 (c 0.418, CHCl3). (Rax)-4: Yield: 85 mg (10%). Beige solid substance; [Found: C,84.28; H, 8.30; N, 3.06; C60H72N2O2 requires C, 84.45; H, 8.51; N,3.28]; Rf (10% hexane/CHCl3) 0.74. 1H NMR (CDCl3) alpha: 8.95 (2H, d,9.0 Hz, H-3′), 8.08 (2H, d, 9.0 Hz, H-4′), 7.96 (2H, d, 7.8 Hz, H-5′), 7.46 (2H, dt, 7.8 Hz, 0.9 Hz, H-6’…

With the complex challenges of chemical substances, we look forward to future research findings about [1,1′-Binaphthalene]-2,2′-diamine

Reference£º
Article; Mikle, Gbor; Boros, Borbla; Kollr, Lszl; Tetrahedron Asymmetry; vol. 25; 23; (2014); p. 1527 – 1531;,
Chiral Catalysts
Chiral catalysts – SlideShare

1,3-Dimesityl-1H-imidazol-3-ium chloride, cas is 141556-45-8, it is a common heterocyclic compound, the chiral-catalyst compound, its synthesis route is as follows.,141556-45-8

General procedure: General Method: To a 20 mL solution of 1.1 equivalents of nickelocene (41 mg, 0.22 mmol) in anhydrous THF, the respective imidazolium NHC precursor (0.2 mmol) was added as a solid. The resulting suspension was then refluxed for 4 h. The general method was modified for 4, 5 and 6. The reactions involving the formation of more electron-deficient 4 and 5 required 10 h at reflux with 2 equivalents of nickelocene (75 mg, 0.4 mmol). Synthesis of 6 was achieved after 16 h of reflux in the presence of 2.6 equivalents of nickelocene (98 mg, 0.52 mmol). The compounds were then purified by column chromatography. Details available in the Supporting information.

With the rapid development of chemical substances, we look forward to future research findings about 1,3-Dimesityl-1H-imidazol-3-ium chloride

Reference£º
Conference Paper; Luca, Oana R.; Thompson, Bennett A.; Takase, Michael K.; Crabtree, Robert H.; Journal of Organometallic Chemistry; vol. 730; (2013); p. 79 – 83;,
Chiral Catalysts
Chiral catalysts – SlideShare

1,3-Dimesityl-1H-imidazol-3-ium chloride, cas is 141556-45-8, it is a common heterocyclic compound, the chiral-catalyst compound, its synthesis route is as follows.,141556-45-8

General procedure: Ag2O (0.5 mmol) was added to a solution of the imidazolium ligand (1mmol) in CH2Cl2. The suspension became clear after stirring 3 h at room temperature. Then a solution of Me2SAuCl (1mmol) in CH2Cl2 was added dropwise. The reaction mixture was stirred for another 4 h. Then the solution was filtered through Celite and the solvent evaporated to leave a volume of ca. 3 ml. The addition of hexane led to the precipitation of a white solid.

With the rapid development of chemical substances, we look forward to future research findings about 1,3-Dimesityl-1H-imidazol-3-ium chloride

Reference£º
Article; Perez-Galan, Patricia; Waldmann, Herbert; Kumar, Kamal; Tetrahedron; vol. 72; 26; (2016); p. 3647 – 3652;,
Chiral Catalysts
Chiral catalysts – SlideShare

Name is 1,3-Bis(2,6-diisopropylphenyl)imidazolium chloride, as a common heterocyclic compound, it belongs to chiral-catalyst compound, and cas is 250285-32-6, its synthesis route is as follows.,250285-32-6

Under the protection of nitrogen, to the reaction tube is sequentially added imidazole salt IPr¡¤HCl (1.1mmol), palladium chloride (1.0mmol), potassium carbonate (2.2mmol), tetrahydrofuran (5.0 ml) and isoquinoline (2.0mmol). The mixture is placed in the oil bath heated reaction (80 C) 12 hours. Stopping the reaction, cooling to room temperature, pressure reducing turns on lathe does solvent, rapid column chromatography separation to obtain a yellow solid product 0.1148g, yield 83%.

With the complex challenges of chemical substances, we look forward to future research findings about 1,3-Bis(2,6-diisopropylphenyl)imidazolium chloride

Reference£º
Patent; Wenzhou University; Shao Lixiong; Lu Jianmei; Liu Feng; (23 pag.)CN106892945; (2017); A;,
Chiral Catalysts
Chiral catalysts – SlideShare

D-Phenylalanine, cas is 673-06-3, it is a common heterocyclic compound, the chiral-catalyst compound, its synthesis route is as follows.,673-06-3

In 50ml dried single necked flask, 0.5g(R) -2-amino-3-phenylpropanoic acid dissolved in 4ml THF and 1ml of water, At RT., add 0.127g (1.05eq) of sodium hydroxide to make alkaline, stirred for 30min,cooled to about 0 deg.C. Slowly dropped 0.727g (1.1eq) (Boc)2O in THF solution. Naturally warm to RT and react for 3h. The reaction was stopped, the low temperature regulator 3 to PH = 4 and extracted 5 times with EA and extracted,washed with water and saturated brine, dried and concentrated to give a light brown oil 412mg.

With the rapid development of chemical substances, we look forward to future research findings about D-Phenylalanine

Reference£º
Patent; Shandong Kaisen Pharmaceutical Co., Ltd.; Wu, Junjun; Li, Rui; Jiang, Xiangsheng; Song, Jiaqi; Yang, Shuangbing; Zhang, Jingyu; Zhang, Erli; (37 pag.)CN105294669; (2016); A;,
Chiral Catalysts
Chiral catalysts – SlideShare

4488-22-6, [1,1′-Binaphthalene]-2,2′-diamine is a chiral-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a solution of BINAM (148 mg, 0. 5 mmol) in THF (anhydrous, 10 mL) was added dropwise 2.5 M n-BuLi in cyclohexane (0.56 mL, 1.4 mmol) at -40oC over 40 min and the reaction mixture was stirred for 1 h. The chlorodiphenylphosphine (440 mg, 1.8 mmol) was added and the reaction was stirred for a further 10 h at -40oC to room temperature. Then, the reaction was quenched with saturated sodium bicarbonate and the mixture was dissolved in little water and extracted with EtOAc (15 mL ¡Á 3). The combined organic extracts were dried (MgSO4)and concentrated. The residue was purified by column chromatography on silica gel using PE-EtOAc as the eluent, to give A-3; yield: 255 mg (67%);, 4488-22-6

The synthetic route of 4488-22-6 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Zhang, Yu; Mao, Mao; Ji, Yi-Gang; Zhu, Jie; Wu, Lei; Tetrahedron Letters; vol. 57; 3; (2016); p. 329 – 332;,
Chiral Catalysts
Chiral catalysts – SlideShare

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.63126-47-6,(S)-2-(Methoxymethyl)pyrrolidine,as a common compound, the synthetic route is as follows.,63126-47-6

Cyanuric chloride (11.07 g, 60 mmol) was dissolved in 40 mL CH3CN and was cooled to about -20¡ã C. To this was added DIEA (11.5 mL, 60 mmol) followed by 3-fluoro-4-methoxyaninline (8.47 g, 60 mmol) in 20 mL CH3CN (reaction froze). The reaction was allowed to warm to room temperature after about 1 hour at -20¡ã C. TLC (2percent CH3OH/CH2Cl2) and mass spectroscopy indicated the presence of the compound 124. The reaction mixture was cooled to about 0¡ã C. before adding DIEA (11.5 mL, 66 mmol). 2-Aminomethyl-1-ethylpyrrolidine (7.77 g, 60 mmol) in CH3CN (10 mL) was added. The reaction was allowed to warm to rt and stirred overnight. Then DIEA (11.5 mL, 66 mmol) and S-(+)-2-methoxyethylpyrrolidine (6.91 g, 60 mmol) in 20 mL 1,4-dioxane were added. The reaction was heated at about 50¡ã C. overnight. The solvent was removed in vacuo, and the resulting residue was purified by flash chromatography on silica gel packed in ethyl acetate. The front running impurities were removed and subsequently the eluent was increased in polarity to 10percent CH3OH:ethyl acetate. The material collected from the column was then dissolved in water and extracted in CH2Cl2 (4 times), dried over MgSO4, and concentrated to dryness to give a brown solid 145 (9.7 g, 27.6percent yield), 71-72¡ã C.; HPLC: Inertsil ODS-3V C18, 40:30:30 [KH2PO4 (0.01M, pH 3.2):CH3OH:CH3CN], 264 nm, Rt 5.37 min, 90.3percent purity; 1H NMR (600 MHz, CDCl3, 55¡ã C.) delta 7.69 (s, 1H), 7.08 (d, J=7.8 Hz, 1H), 6.86 (t, J=9 Hz, 1H), 4.29 (s, 1H), 3.90-3.96 (m, 1H), 3.84 (s, 3H), 3.63-3.81 (m, 6H), 3.35 (s, 3H), 3.23-3.25 (m, 1H), 2.85 (broad s, 1H), 2.78 (broad s 1H), 2.14 (broad s, 2H), 1.89-2.04 (m, 6H), 1.37 (apparent t, J=7.2 Hz, 3H); 13C NMR (150.8 MHz, CDCl3, 55¡ã C.) delta 165.8, 163.8 (2C), 152.3 (d, Jc-f=243.5 Hz), 143.0 (142.9, rotamer or diastereumer), 133.7 (133.67, rotamer or diastereomer), 115.0, 114.4, 109.1 (108.9, rotamer or diastereomer), 72.8, 66.6, 59.0, 57.0, 56.6, 53.7, 51.0, 46.8, 42.2, 28.4 (28.2, rotamer or diastereomer), 23.1 (23.0, rotamer or diastereomer), 10.9; MS (ESI) m/z 460.2 (M+H, 44.7), 251.1 (47.7), 235.1 (27.5), 231.1 (37.4), 230.6 (100), 214.6 (36.5).

As the paragraph descriping shows that 63126-47-6 is playing an increasingly important role.

Reference£º
Patent; Timmer, Richard T.; Alexander, Christopher W.; Pillarisetti, Sivaram; Saxena, Uday; Yeleswarapu, Koteswar Rao; Pal, Manojit; Reddy, Jangalgar Tirupathy; Krishna Reddy, Velagala Venkata Rama Murali; Sridevi, Bhatlapenumarthy Sesha; Kumar, Potlapally Rajender; Reddy, Gaddam Om; US2004/209881; (2004); A1;,
Chiral Catalysts
Chiral catalysts – SlideShare