Category: chiral-catalyst

As a common heterocyclic compound, it belongs to quinuclidine compound,Quinuclidine-4-carboxylic acid hydrochloride,40117-63-3,Molecular formula: C8H14ClNO418,mainly used in chemical industry, its synthesis route is as follows.,141556-45-8

General procedure: To a solution of the dimeric Ni(II)-complex in THF (20 mL) wasadded the respective imidazolium chloride (2 equiv.) and KOtBu(2.3 equiv.) or NaHMDS (2.3 equiv.). The reaction mixture washeated to 60 C for 2 h and then left at room temperature overnight.The solvent was removed under reduced pressure and the residuewas extracted into CH2Cl2. This CH2Cl2 solutionwas passed througha short column of alumina. The eluting orange-brown solution wassubsequently evaporated to dryness. Diffusion of cyclohexane intoa THF solution afforded orange-brown crystals after several days.Samples for elemental analysis were further recrystallised fromMeOH.

With the synthetic route has been constantly updated, we look forward to future research findings about 1,3-Dimesityl-1H-imidazol-3-ium chloride,belong chiral-catalyst compound

Reference£º
Article; Clauberg, Maximilian H.; Schmidt, Darya; Rust, Joerg; Lehmann, Christian W.; Arefyeva, Natalia; Wickleder, Mathias; Mohr, Fabian; Journal of Organometallic Chemistry; vol. 881; (2019); p. 45 – 50;,
Chiral Catalysts
Chiral catalysts – SlideShare

1121-22-8, trans-Cyclohexane-1,2-diamine is a chiral-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Into a solution containing 1,6-diisocyanatohexane (4.04 grams, 24.0 mmol; obtained from Sigma-Aldrich Fine Chemicals, Milwaukee, Wis.) and anhydrous tetrahydrofuran (100 mL, Sigma-Aldrich Fine Chemicals, Milwaukee, Wis.) stirring at room temperature was added 2-ethylhexanol (3.13 grams, 24.0 mmol, obtained from Sigma-Aldrich Fine Chemicals) and dibutyltin dilaurate (0.38 grams, 0.6 mmol, obtained from Sigma-Aldrich Fine Chemicals) as the catalyst. The mixture was stirred and heated to an internal temperature of about 70 C. The progress of the reaction was monitored by 1H-NMR spectroscopy for the consumption of 2-ethylhexanol starting material, indicated by the disappearance of the -CH2OH multiplet, which appears at 3.5 ppm as a shoulder peak on the downfield end of the intermediate isocyanate product whose signal is located at 3.35-3.40 ppm. The mixture was cooled to about 5 C. internal temperature; thereafter, to this mixture was added dropwise a solution of trans-1,2-diaminocyclohexane (1.37 grams, 12 mmol; obtained as a racemic mixture of (1R,2R) and (1S,2S) stereoisomers from Sigma-Aldrich Fine Chemicals) dissolved in anhydrous tetrahydrofuran (10 mL). The mixture was stirred for about 30 minutes while warming up to room temperature, and thickened to form a gelatinous slurry. FTIR spectroscopic analysis of a reaction sample showed very little unreacted isocyanate (peak at 2180 cm-1, sample prepared as a KBr pellet). Residual isocyanate was quenched by addition of 5 mL of methanol. A crystalline product was isolated from the slurry by first adding methylene chloride (40 mL) followed with stirring for approximately 20 minutes to ensure full precipitation out of the gel slurry. The solid was filtered by suction on a paper filter, rinsed with methylene chloride (about 10 mL), and then dried in air to give 7.36 grams of off-white solid (86% yield). The product was believed to be of the formulae 1H-NMR spectroscopic analysis of the solid was performed in DMSO-d6 (300 MHz) at high temperature (60 C.) and indicated the above structure, with the following assigned peaks: 0.90 ppm (multiplet, 6 H integration, -OCH2CH(CH2CH3)CH2CH2CH2CH3); 1.0-1.95 ppm (broad multiplets, 20 H integration, 8 methylene protons from 2-ethylhexanol portion, 8 methylene protons from the 1,6-diisocyanatohexane portion, and 4 methylene protons from the cyclohexane ring portion); 2.95 ppm (narrow multiplet, 4 H integration, -NH(CO)NHCH2(CH2)4CH2NH(CO)O); 3.20 ppm (broad singlet, 1 H integration, tertiary methine proton adjacent to urea group on cyclohexane ring); 3.90 ppm (doublet, 2 H integration, OCH2CH(CH2CH3)CH2CH2CH2CH3); 5.65 ppm and 5.75 ppm (each a broad singlet, 1 H integration, urea NH protons); 6.75 ppm (broad singlet, 1 H integration, urethane NH proton). Elemental analysis calculated for C: 64.19%, H: 10.49%, N: 11.82%; found for C: 61.70%, H: 9.86%, N: 14.91%., 1121-22-8

The synthetic route of 1121-22-8 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Xerox Corporation; US2006/122415; (2006); A1;,
Chiral Catalysts
Chiral catalysts – SlideShare

1121-22-8, trans-Cyclohexane-1,2-diamine is a chiral-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: Salen ligands were obtained in the stoichiometric reaction of salicylic aldehyde and trans-1,2-diaminocyclohexane in 96% ethanol solution according to [13c]. Reactions were carried out in 50 ml three-neck round-bottomed flask, equipped with reflux condenser, dropping funnel, magnetic stirrer and heating mantle. The solution of trans-1,2-diaminocyclohexane (0,57 ml, 5 mmol) in EtOH (10 ml) was slowly added to a hot solution of appropriate aldehyde (10 mmol) in EtOH (20 ml). The reaction mixture was heated at reflux for 1.5 h. After cooling to room temperature, the yellow precipitate that formed was filtered off and washed with cold EtOH (5 ml). The ligands were used without further purification. (¡À)-trans-N,N-bis(5-methoxy-3-tert-butylsalicylidene)-1,2-cyclohexanediamine (H2salcn(BuOMe)) Anal. Calc. for C30H42N2O2: C, 72.84%; H, 8.56%; N, 5.66%; C/N = 12.87. Found: C, 72.63%; H, 8.45%; N, 5.68%; C/N = 12.78. 1H-NMR (CDCl3): delta = 13.40 (bs, 2H), 8.24 (s, 2H), 6.90 (m, 2H), 6.48 (m,2H), 3.69 (s, 6H), 3.32 (m, 2H), 1.99 (m, 2H), 1.89 (m, 2H), 1.77 (m, 2H), 1.47 (m, 2H), 1.39 (s, 18H). Yield: 1.33 g, 54%, mp = 146-149 C., 1121-22-8

As the paragraph descriping shows that 1121-22-8 is playing an increasingly important role.

Reference£º
Article; Tomczyk; Nowak; Bukowski; Bester; Urbaniak; Andrijewski; Olejniczak; Electrochimica Acta; vol. 121; (2014); p. 64 – 77;,
Chiral Catalysts
Chiral catalysts – SlideShare

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.602-09-5,[1,1′-Binaphthalene]-2,2′-diol,as a common compound, the synthetic route is as follows.

602-09-5, (¡À)-BINOL (24.9 g, 86.9 mmol), 1-bromobutane (25.0 g, 182.5 mmol), potassium carbonate (36.0 g, 260.7 mmol) was added to a solution of DMAc (250 mL), and the mixture was stirred at 90 C. for 10 hours for reaction. Further, potassium carbonate (15.0 g, 108.5 mmol), 1-Bromobutane (11.5 g, 83.9 mmol) was added, the mixture was stirred at the same temperature for 12 hours and reacted. After cooling to room temperature, toluene and ion exchanged water were added, the organic layer was washed twice with ion exchanged water, and the solvent was distilled off under reduced pressure. Methanol was added to the concentrate, the solid content was dispersed, filtered, dried under reduced pressure at 40 C., Intermediate 172A (32.1 g, 92.7%) was obtained as a cream colored solid.

As the paragraph descriping shows that 602-09-5 is playing an increasingly important role.

Reference£º
Patent; ADEKA CORPORATION; YANAGISAWA, SATOSHI; MIHARA, TAIKI; MIYAKE, JUNYA; (60 pag.)JP2017/149661; (2017); A;,
Chiral Catalysts
Chiral catalysts – SlideShare

As a common heterocyclic compound, it belongs to quinuclidine compound,Quinuclidine-4-carboxylic acid hydrochloride,40117-63-3,Molecular formula: C8H14ClNO348,mainly used in chemical industry, its synthesis route is as follows.,4488-22-6

Under nitrogen conditions, add tris (dibenzylidene-base acetone) dipalladium (37 mg, 0.04 mmol, purchased from ANEG) to Schlenk bottles with magnetons, 1,1′-Binaphthyl-2,2′-bisdiphenylphosphine (50 mg, 0.08 mmol, purchased from Anagi), cesium carbonate (3.65 g, 11.2 mmol, purchased from Anagi), 2-trifluoromethanesulfonyl cycloheptatrienone (4.88 g, 19.2 mmol), 1,1′-bi-2-naphthylamine (2.27 g, 8 mmol, purchased from Enagi) and 50 ml of toluene. The resulting mixture was stirred at 100 C for 24 hours. The reaction was completed and the temperature was reduced to room temperature. After the toluene-insoluble solid was filtered off with diatomaceous earth, 100 mesh silica gel was added to the resulting solution to spin dry the sample. The obtained crude product was then passed through a 200-300 mesh silica gel column, using ethyl acetate as an eluent, and the eluent was spin-dried to obtain a brown solid (2.68 g, yield 68%).

With the synthetic route has been constantly updated, we look forward to future research findings about [1,1′-Binaphthalene]-2,2′-diamine,belong chiral-catalyst compound

Reference£º
Patent; University of Science and Technology of China; Chen Changle; Zhang Pan; (17 pag.)CN110423246; (2019); A;,
Chiral Catalysts
Chiral catalysts – SlideShare

As a common heterocyclic compound, it belongs to quinuclidine compound,Quinuclidine-4-carboxylic acid hydrochloride,40117-63-3,Molecular formula: C8H14ClNO237,mainly used in chemical industry, its synthesis route is as follows.,351498-10-7

A 50 ml. flask was charged withLambda/,Lambda/-bis(3,5-di-te/t-butylsalicylidene)-1 ,1 ,2,2-tetramethylethenediamine (0.4302 g, 0.78 mmol, 1.0 equiv), EtOH (17 ml_), and Co(OAc)2 (0.1385 g, 0.78 mmol, 1.0 equiv). The mixture was degassed and then heated to reflux under nitrogen for 3 h, cooled to room temperature. The precipitate was filtered and the purple solid was washed with EtOH (10 ml.) and dried under high vacuum to give 0.3533 g (75%) of the cobalt(ll) complex.

With the complex challenges of chemical substances, we look forward to future research findings about 6,6′-((1E,1’E)-((2,3-Dimethylbutane-2,3-diyl)bis(azanylylidene))bis(methanylylidene))bis(2,4-di-tert-butylphenol),belong chiral-catalyst compound

Reference£º
Patent; VITAE PHARMACEUTICALS, INC.; CLAREMON, David, A.; LEFTHERIS, Katerina; ZHUANG, Linghang; TICE, Colin, M.; SINGH, Suresh, B.; YE, Yuanjie; WO2011/11123; (2011); A1;,
Chiral Catalysts
Chiral catalysts – SlideShare

1121-22-8, trans-Cyclohexane-1,2-diamine is a chiral-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

N,N’-[(2-ethoxycarbonyl)eth-1-yl]-trans-cyclohexane-1,2-diamine 2a: To freshly distilled trans-1,2-diaminocyclohexane 1 (1 ml, 8.33 mmol) in 50 ml of ethanol was added vinyl propionate (1.50 ml, 13.7 mmol) in one portion. After stirring 20h at room temperature, the reaction mixture was concentrated by rotary evaporation to yield a pale yellow oil (2.6 g, 8.32 mmol, 100%) witch was used directly in the next step. 1H NMR (CDCl3): d 1.22 (t, 12H), 1.67 (m, 2H), 1.82 (m, 2H), 2.06 (m, 2H+2H), 2.43 (t, 4H), 2.67 (dt, 2H), 2.98 (dt, 2H), 4.10 (q, 4H). 13C NMR (CDCl3): d 14.17, 24.31, 31.46, 35.34, 42.19, 60.23, 61.29, 172.69 , (M+H+): 315

1121-22-8, The synthetic route of 1121-22-8 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; 99953923.2; EP1123301; (2003); B1;,
Chiral Catalysts
Chiral catalysts – SlideShare

As a common heterocyclic compound, it belongs to chiral-catalyst compound, name is [1,1′-Binaphthalene]-2,2′-diamine, and cas is 4488-22-6, its synthesis route is as follows.,4488-22-6

The mixture of BINAM (227.2 mg, 0.8 mmol), BoC-D-proline (222.9 mg, 0.73 mmol), EDCI (95.8 mg, 1.45 mmol) and HOBt (196 mg, 1.45 mmol) in DCM (20 mL) was tirred at room temperature for 5 h. The mixture was washed by water (25 mL ¡Á 3), dried (MgSO4) and concentrated. The residue was purified by column chromatography on silica gel using PE-EtOAc as the eluent, to give tert-butyl2-((2′-amino-[1,1′-binaphthalen]-2-yl)carbamoyl)pyrrolidine-1-carboxylate; yield: 202 mg (54%). Then 1.5 ml TFA and 1.5 ml Et3SiH were added to the prepared tert-butyl2-((2′-amino-[1,1′-binaphthalen]-2-yl)carbamoyl)pyrrolidine-1-carboxylate in DCM (2.0 mL) , after stirred for 2 h the residue was added NaOH to adjust pH>7 AND extracted by DCM, then the residue was concentrated and purified by column chromatography on silica gel using PE-EtOAc as the eluent, to give A-4; yield: 121 mg (73%);

With the complex challenges of chemical substances, we look forward to future research findings about 4488-22-6,belong chiral-catalyst compound

Reference£º
Article; Zhang, Yu; Mao, Mao; Ji, Yi-Gang; Zhu, Jie; Wu, Lei; Tetrahedron Letters; vol. 57; 3; (2016); p. 329 – 332;,
Chiral Catalysts
Chiral catalysts – SlideShare

Name is trans-Cyclohexane-1,2-diamine, as a common heterocyclic compound, it belongs to chiral-catalyst compound, and cas is 1121-22-8, its synthesis route is as follows.,1121-22-8

12.65 g of anhydrous magnesium sulphate (105.1 mmoles) and 4.2 ml of a racemic trans-1,2-diaminocyclohexane mixture (35.0 mmoles) were successively added to a solution of 6.66 ml of 2-pyridylaldehyde (70.0 mmoles) in 50 ml of absolute ethanol. The reaction mixture was stirred for 20 hours at ambient temperature (the solution turned yellow after stirring for three hours), heated for 2.5 hours under reflux, then filtered through a frit. The isolated solid was washed with dichloromethane. The total filtrate was concentrated completely under reduced pressure to isolate an ochre solid, which was re-crystallised from ethanol. 8.2 g of pale yellow crystals were obtained, which corresponded to a 80.1% yield. The characteristics were as follows: M.Pt: 140-141 C. (EtOH) (racemic mixture) (Lit: 127-129 C.: obtained by Belokon, Y N; North, M: Churkina, T D; Ikonnikov, N S; Maleev, V I; Tetrahedron 2001, 57, 2491-2498 for the stereoisomer 1S,2S, hexane-MeOH); 1H NMR/CDCl3: delta 8.51 (m, 2H, H1,2), 8.28 (s, 2H, H7,14), 7.84 (m, 2H, H4,17), 6.55-7.64 (m, 2H, H5,16), 7.14-7.21 (m, 2H, H3,18), 3.50 (m, 2H, H8,13), 1,81 (m, 6H, H10,11 and H carried by carbons 9 and 12 located in the position cis (or trans) with respect to the adjacent nitrogen atoms), 1.40-1.53 (m, 2H, H carried by carbons 9 and 12 located in the trans (or cis) position with respect to the adjacent nitrogen atoms). 13C NMR/CDCl3: delta 161.42 (C7 and C14), 154.61 (C6 to C15), 149.21 (C1 and C2), 136.39 (C4 and C17), 124.43 (C3 and C18), 121.29 (C5 and C16), 73.53 (C8 and C13), 32.70 (C9 and C12), 24.33 (C10 and C11). FAB+ (NBA matrix): 293 (100%, M+1), 107 (52%, 2-pyridylaldimine+H+), 92 (38%, C5H4N-CH2+), 119 (25%, C5H4N-CHN-CH2+), 294 (23%, M+2), 204 (22%, [M-(2-pyridylidene)]+), 79 (21%, pyridine+), 187 (20%, M-[2-pyridylineamino]+), 585 (1%, 2M+1).

With the complex challenges of chemical substances, we look forward to future research findings about trans-Cyclohexane-1,2-diamine

Reference£º
Patent; Taillefer, Marc; Cristau, Henri-Jean; Cellier, Pascal-Philippe; US2005/234239; (2005); A1;,
Chiral Catalysts
Chiral catalysts – SlideShare

It is a common heterocyclic compound, the chiral-catalyst compound, [1,1′-Binaphthalene]-2,2′-diamine, cas is 4488-22-6 its synthesis route is as follows.,4488-22-6

General procedure: In a typical experiment Pd(OAc)2 (5.6 mg, 0.025 mmol), triphenylphosphine (13.2 mg, 0.05 mmol), 17-iodo-5alpha-androsta-16-ene 1 (0.5 mmol), 2,2′-diamino-1,1′-binaphthalene 2 (varied from 1.0 mmol to 0.125 mmol) and triethylamine (0.5 mL) were dissolved in DMF (10 mL) under argon in a 100 mL three-necked flask equipped with a gas inlet, reflux condenser with a balloon (filled with argon) at the top. The atmosphere was changed to carbon monoxide. The reaction was conducted for the given reaction time upon stirring at 50 C and analysed by TLC. The mixture was then concentrated and evaporated to dryness. The residue was dissolved in chloroform (20 mL) and washed with water (3 20 mL), 5% hydrochloric acid (20 mL), saturated NaHCO3 (20 mL) and brine (20 mL). The organic phase was dried over Na2SO4, filtered and evaporated to give a solid material. All compounds were subjected to column chromatography (Silicagel 60 (Merck), 0.063-0.200 mm), EtOAc/CHCl3 or hexane/CHCl3 (the exact ratios are specified in Section 4.4 for each compound). 4.3. Characterisation of the products (Fig. 3) (Sax)-3: Yield: 410 mg (72%). Off-white yellow solid, mp 137-142 C; [Found: C, 84.55; H, 7.65; N, 4.70; C40H44N2O requires C,84.46; H, 7.80; N, 4.93]; Rf (5% EtOAc/CHCl3) 0.68. 1H NMR (CDCl3) delta: 8.94 (1H, d, 9.0 Hz, H-30), 8.03 (1H, d, 9.0 Hz, H-40), 7.94 (1H, d,8.2 Hz, H-50), 7.87 (1H, d, 8.5 Hz, H-300), 7.82 (1H, d, 7.5 Hz, H-400), 7.43 (1H, dt, 6.3 Hz, 1.6 Hz, H-60), 7.35 (1H, s, NH), 7.31 (1H, dt,8.5 Hz, 0.8 Hz, H-70), 7.29-7.26 (2H, m, H-600 , H-600), 7.23 (1H, dt,6.8 Hz, 1.1 Hz, H-700), 7.16 (1H, d, 8.7 Hz, H-80), 6.96 (1H, d, 8.2 Hz,H-800), 6.21 (1H, dd, 2.9 Hz, 1.5 Hz, H-16), 3.69 (2H, s, NH2), 2.05 (1H, ddd, 16.7 Hz, 6.5 Hz, 3.4 Hz, 15-CHaHb), 1.78 (1H, ddd,16.7 Hz, 11.9 Hz, 1.4 Hz, 15-CHaHb), 1.07-0.54 (23H, m, skeleton protons), 0.78 (3H, s, 19-CH3), 0.62 (3H, s, 18-CH3). 13C NMR (CDCl3) delta: 163.6, 150.4, 143.0, 140.0, 135.7, 133.8, 132.5. 131.1, 130.3, 129.3, 128.3, 128.2, 128.1, 127.5, 126.8, 125.3, 124.9, 123.6, 122.8, 120.4, 119.7, 118.1, 110.5, 56.8, 54.7, 47.2, 45.3, 38.4, 36.3, 34.2, 33.7, 31.8, 31.4, 29.0, 28.8, 26.8, 22.2, 20.5, 16.0, 12.1. IR (KBr, m(cm1)): 3440 (amide-NH), 3398 (NH2), 1665 (CON), 1620 (CC). MS m/z (rel int.): 569.4 (100, (M+H)+), 381 (9), MS/MS m/z (relint.): 551.4 (29), 285.2 (100). [alpha]D20 = 37.1 (c 1.34, CHCl3). (Rax)-3: Yield: 114 mg (20%). Off-white solid substance; [Found:C, 84.30; H, 7.66; N, 4.77; C40H44N2O requires C, 84.46; H, 7.80; N,4.93]; Rf (5% EtOAc/CHCl3) 0.72. 1H NMR (CDCl3) delta: 8.95 (1H, d,9.0 Hz, H-30), 8.03 (1H, d, 9.0 Hz, H-40), 7.93 (1H, d, 7.9 Hz, H-50), 7.87 (1H, d, 8.9 Hz, H-300), 7.82 (1H, d, 7.8 Hz, H-400), 7.43 (1H, dt,6.4 Hz, 1.2 Hz, H-60), 7.36 (1H, s, NH), 7.31 (1H, dt, 8.6 Hz, 0.8 Hz,H-70), 7.29-7.26 (2H, m, H-6”, H”), 7.23 (1H, dt, 6.9 Hz, 1.5 Hz,H-7”), 7.16 (1H, d, 8.5 Hz, H-8′), 6.96 (1H, d, 8.4 Hz, H-8”), 6.21 (1H, dd, 3.1 Hz, 1.5 Hz, H-16), 3.69 (2H, s, NH2), 2.05 (1H, ddd, 16.3 Hz, 6.4 Hz, 3.4 Hz, 15-CHaHb), 1.78 (1H, ddd, 16.6 Hz,11.7 Hz, 2.0 Hz, 15-CHaHb), 1.07-0.53 (23H, m, skeleton protons), 0.77 (3H, s, 19-CH3), 0.31 (3H, s, 18-CH3). 13C NMR (CDCl3) delta: 163.5, 150.4, 143.1, 140.2, 135.7, 133.8, 132.4, 131.1, 130.3, 129.3, 128.4, 128.3, 128.2, 127.5, 126.8, 125.3, 124.9, 123.6,122.8, 120.4, 119.7, 118.0, 110.6, 56.8, 54.8, 47.2, 45.2, 38.4, 36.3, 34.2, 33.7, 31.7, 31.4, 29.0, 28.8, 26.8, 22.2, 20.5, 15.5, 12.1. IR(KBr, m (cm1)): 3441 (amide-NH), 3396 (NH2), 1665 (CON), 1620 (CC). MS m/z (rel int.): 569.4 (100, (M+H)+), 381 (9), MS/MS m/z (rel int.): 551.4 (29), 285.2 (100). [alpha]D20 = +191.5 (c 0.914, CHCl3). (Sax)-4: Yield: 102 mg (12%). Beige solid substance; [Found: C,84.31; H, 8.35; N, 3.12; C60H72N2O2 requires C, 84.45; H, 8.51; N,3.28]; Rf (10% hexane/CHCl3) 0.69. 1H NMR (CDCl3) alpha: 8.94 (2H, d,9.2 Hz, H-3′), 8.08 (2H, d, 9.2 Hz, H-4′), 7.95 (2H, d, 8.2 Hz, H-5′),7.46 (2H, dt, 7.2 Hz, 0.9 Hz, H-6′), 7.35 (2H, dt, 7.2 Hz, 0.9 Hz, H-7′), 7.1 (2H, d, 9.3 Hz, H-8′), 7.13 (2H, s, NH), 6.05 (2H, dd, 3.1 Hz, 1.5 Hz, H-16), 2.02 (2H, ddd, 16.8 Hz, 6.4 Hz, 3.1 Hz, 15-CHaHb), 1.88 (2H, dd, 9.9 Hz, 3.1 Hz, 14-CH), 1.75 (2H, ddd, 16.8 Hz,11.7 Hz, 1.5 Hz, 15-CHaHb), 1.69-0.54 (44H, m, skeleton protons), 0.77 (6H, s, 19-CH3), 0.57 (6H, s, 18-CH3). 13C NMR (CDCl3) alpha: 163.6, 150.2, 140.0, 136.0, 135.2, 132.4, 131.3, 130.0, 128.2,127.5, 125.3, 124.9, 120.5, 118.1, 56.6, 54.8, 47.2, 45.4, 38.4, 36.3, 34.2, 33.6, 31.7, 31.4, 29.0, 28.8, 26.8, 22.1, 20.5, 16.1, 12.1. IR (KBr, m (cm1)): 3408 (amide-NH), 1677 (CON), 1621 (CC). MS m/z (rel int.): 853.6 ((M+H)+); 875.6 ((M+Na)+), 891.5 ((M+K)+). [alpha]D20 = +12.0 (c 0.418, CHCl3). (Rax)-4: Yield: 85 mg (10%). Beige solid substance; [Found: C,84.28; H, 8.30; N, 3.06; C60H72N2O2 requires C, 84.45; H, 8.51; N,3.28]; Rf (10% hexane/CHCl3) 0.74. 1H NMR (CDCl3) alpha: 8.95 (2H, d,9.0 Hz, H-3′), 8.08 (2H, d, 9.0 Hz, H-4′), 7.96 (2H, d, 7.8 Hz, H-5′), 7.46 (2H, dt, 7.8 Hz, 0.9 Hz, H-6’…

With the complex challenges of chemical substances, we look forward to future research findings about [1,1′-Binaphthalene]-2,2′-diamine

Reference£º
Article; Mikle, Gbor; Boros, Borbla; Kollr, Lszl; Tetrahedron Asymmetry; vol. 25; 23; (2014); p. 1527 – 1531;,
Chiral Catalysts
Chiral catalysts – SlideShare