Category: chiral-catalyst

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.22795-99-9,(S)-(1-Ethylpyrrolidin-2-yl)methanamine,as a common compound, the synthetic route is as follows.

22795-99-9, General procedure: (2-(7-Aza-1H-benzotriazole-1-yl)-1,1,3,3-tetramethyluronium hexafluorophosphate), (HATU) (1.2 equivalents) was added to a solution of acid (1 equivalent), the appropriate amine (1.5 equivalents) and DIEA (2 equivalents) in dry acetonitrile (10 mL) at room temperature under argon atmosphere. The reaction mixture was stirred at room temperature for 1-2 h. Solvent was evaporated under reduced pressure and the crude product was purified using a Teledyne Isco Combiflash Rf purification machine to provide the desired amide in excellent yield.

22795-99-9 (S)-(1-Ethylpyrrolidin-2-yl)methanamine 643457, achiral-catalyst compound, is more and more widely used in various fields.

Reference£º
Article; Mathew, Bini; Hobrath, Judith V.; Connelly, Michele C.; Kiplin Guy; Reynolds, Robert C.; Bioorganic and Medicinal Chemistry Letters; vol. 27; 20; (2017); p. 4614 – 4621;,
Chiral Catalysts
Chiral catalysts – SlideShare

22795-99-9, (S)-(1-Ethylpyrrolidin-2-yl)methanamine is a chiral-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

22795-99-9, Example 45 Synthesis of ({4-cycloheptylamino-6-[((S)-1-ethyl-pyrrolidin-2-ylmethyl)-amino]-1,3,5-triazin-2-yl}-phenyl-amino)-acetonitrile (143) To a mixture of cyanuric chloride (0.368 g, 2 mmol) in CH3CN at about -20¡ã C. was added N-phenyl glycinonitrile (0.264 g, 2 mmol) in CH3CN followed by the addition of DIEA (0.35 mL, 2 mmol) and stirred for about 1 hour. The reaction mixture was then stirred at room temperature for about 1 hour. Then, cycloheptylamine (0.25 mL, 2 mmol) and DIEA (0.35 mL, 2 mmol) were added and the reaction mixture was stirred overnight at rt. Then, S-(-)-2-aminomethyl-N-ethyl pyrrolidine (0.29 mL, 2 mmol) and DIEA (0.35 mL, 2 mmol) were added and the reaction mixture was refluxed overnight. The reaction mixture was diluted with ethyl acetate and washed with brine. The organic layer was separated and dried over sodium sulfate, filtered, and concentrated under reduced pressure. The crude material was purified by column chromatography eluding with 96:3:1 methylene chloride:methanol:conc. ammonium hydroxide to yield 143, (0.300 g, 33percent) mp 53-55¡ã C.; HPLC: Inertsil ODS-3V C18, 40:30:30 [KH2PO4 (0.01 M, pH 3.2): CH3OH: CH3CN], 264 nm, Rt 6.9 min, 94.1percent purity; MS (ESI): m/z 449 (M+H, 100), 381 (1.2), 353 (16.2), 226 (19.9), 225 (54.3), 212 (20.5), 177 (18.3), 164 (9.6).

As the paragraph descriping shows that 22795-99-9 is playing an increasingly important role.

Reference£º
Patent; Timmer, Richard T.; Alexander, Christopher W.; Pillarisetti, Sivaram; Saxena, Uday; Yeleswarapu, Koteswar Rao; Pal, Manojit; Reddy, Jangalgar Tirupathy; Krlshna Reddy, Velagala Venkata Rama Murali; Sridevi, Bhatlapenumarthy Sesha; Kumar, Potlapally Rajender; Reddy, Gaddam Om; US2004/209880; (2004); A1;,
Chiral Catalysts
Chiral catalysts – SlideShare

22795-99-9, (S)-(1-Ethylpyrrolidin-2-yl)methanamine is a chiral-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

0.53 g (1.5 mmol) of the compound 2a prepared in Preparation Example 7 was dissolved in 10 ml of anhydrous toluene, 0.39 ml of thionyl chloride was added,Argon gas was heated at 60 ¡ã C for 1 hour and evaporated to dryness. 10 ml of anhydrous DCM was added,(S) -2-aminomethyl-1-ethylpyrrole was added dropwise under ice-water bath, the reaction was stirred at room temperature for 8 hours, diluted with 50 ml of DCM, washed with saturated aqueous NaHCO 3,Saturated NaCl aqueous solution were washed three times, the organic layer was dried over Na2SO4, filtered and evaporated to give a yellowish oil, medium pressure silica gel column,Mobile phase petroleum ether: ethyl acetate 3: 1, the product fractions were collected and evaporated to dryness to give a yellowish oil 0.593g, yield 85.2percent., 22795-99-9

22795-99-9 (S)-(1-Ethylpyrrolidin-2-yl)methanamine 643457, achiral-catalyst compound, is more and more widely used in various fields.

Reference£º
Patent; Beijing Nerve Surgical Department Institute; Liu Qian; Zhang Yazhuo; Yang Xiaoxiao; CN106366075; (2017); A;,
Chiral Catalysts
Chiral catalysts – SlideShare

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.250285-32-6,1,3-Bis(2,6-diisopropylphenyl)imidazolium chloride,as a common compound, the synthetic route is as follows.

General procedure: Under a N2 atmosphere, a mixture of imidazolium salts 1(0.225 mmol), PdCl2 (0.15 mmol), K2CO3 (0.45 mmol) and picolinicacid 2 (0.15 mmol) was stirred in anhydrous THF (2.0 mL) underreux for 12 h. Then the solvent was removed under reducedpressure, and the residue was puried by ash column chroma-tography (SiO2) to give complexes 3 as yellow solids. 4.2.1.1. Compound 3a. yellow solid. m.p. 248C (decomposed).1HNMR (500 MHz, CDCl3, TMS) d 8.55 (d, J 5.5 Hz, 1H), 7.83e7.77 (m,2H), 7.49 (t, J 7.5 Hz, 2H), 7.34 (d, J 7.5 Hz, 4H), 7.31e7.28 (m,1H),7.17 (s, 2H), 2.95 (hept, J 7.0 Hz, 4H), 1.42 (d, J 7.0 Hz, 12H), 1.14(d, J 7.0 Hz, 12H).13C NMR (125 MHz, CDCl3) d 172.7, 157.4, 151.3,146.8, 146.5, 139.1, 134.5, 130.4, 126.6, 126.2, 125.1, 124.0, 28.6, 26.2,22.9. IR (neat) n 2964, 1668, 1600, 1458, 1408, 1337, 1291, 1047, 944,800, 771, 755, 713 cm1. HRMS (ESI) calcd for C33H41ClN3O2Pd[MH]: 654.1920; found: 654.1917. Anal. calcd forC33H40ClN3O2Pd: C, 60.47%; H, 6.18%; N, 6.44%; found: C, 60.62%; H,6.11%; N, 6.31%.

250285-32-6, As the paragraph descriping shows that 250285-32-6 is playing an increasingly important role.

Reference£º
Article; Zhang, Zhi-Mao; Gao, Yu-Jue; Lu, Jian-Mei; Tetrahedron; vol. 73; 52; (2017); p. 7308 – 7314;,
Chiral Catalysts
Chiral catalysts – SlideShare

63126-47-6, (S)-2-(Methoxymethyl)pyrrolidine is a chiral-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,63126-47-6

To a mixture of lithium 7-chlorothieno [3,2-b] pyridine-2-carboxylate (6.59 g, 30 [MMOLE)] in DMF (100 [ML)] were added diisopropylethylamine, (6 [ML,] 4.45 g, 34.4 mmole), benzotriazol- 1-yloxytris (pyrrolidino) phosphonium [HEXAFLUOROPHOSPHATE] (16.16 g, 31 mmole) and [S- (+)-2-] (methoxymethyl) pyrrolidine (3.73 g, 32.4 [MMOLE).] The resultant reaction mixture was stirred at ambient temperaure for 16 hours. The crude reaction mixture was poured into water (600 [ML)] and extracted with EtOAc (3 x 200 ml). The combined organic extracts were washed with water (4 x 200 ml), dried over [NA2SO4] and concentrated, in vacuo, to give 8.8 g of an amber oil, which was purified by silica gel chromatography. Elution with Et2O : EtOAc (67: 33) and evaporation of the appropriate fractions gave 6.89 [G] (74percent) of an orange [SYRUP.APOS;H] NMR (DMSO-d6): 8 8.62 (1 H, d, J = 5.0 Hz), 7.88 (1 H, s), 7.35 (1 H, d, J = 5.0 Hz), 4.54-4. 47 [(1 H,] m), 3.93-3. 75 (2H, m), 3.71-3. 55 (2H, m), 3.37 (3H, s), 2.15-1. 92 (4H, [M). ANAL. CALCD.] for [C14H1SN202SCI] : [C,] 54.10 ; H, 4.87 ; N, 9.01 ; S, 10.32 ; Cl, 11.41. Found: C, 53.96

63126-47-6 (S)-2-(Methoxymethyl)pyrrolidine 671217, achiral-catalyst compound, is more and more widely used in various fields.

Reference£º
Patent; PFIZER INC.; WO2003/106462; (2003); A1;,
Chiral Catalysts
Chiral catalysts – SlideShare

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.250285-32-6,1,3-Bis(2,6-diisopropylphenyl)imidazolium chloride,as a common compound, the synthetic route is as follows.

Under the protection of nitrogen, to the reaction tube is sequentially added imidazole salt IPr¡¤HCl (1.1mmol), palladium chloride (1.0mmol), potassium carbonate (2.2mmol), tetrahydrofuran (5.0 ml) and isoquinoline (2.0mmol). The mixture is placed in the oil bath heated reaction (80 C) 12 hours. Stopping the reaction, cooling to room temperature, pressure reducing turns on lathe does solvent, rapid column chromatography separation to obtain a yellow solid product 0.1148g, yield 83%., 250285-32-6

As the paragraph descriping shows that 250285-32-6 is playing an increasingly important role.

Reference£º
Patent; Wenzhou University; Shao Lixiong; Lu Jianmei; Liu Feng; (23 pag.)CN106892945; (2017); A;,
Chiral Catalysts
Chiral catalysts – SlideShare

141556-45-8, 1,3-Dimesityl-1H-imidazol-3-ium chloride is a chiral-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Finely powdered PdCl2 (177 mg, 1.00 mmol) was suspended in CH3CN (5 mL) and N-benzyldimethylamine (160 muL, 143 mg, 1.05 mmol) were added. The solution was heated to 8O0C with stirring until a clear, orange solution was formed (approx. 20 min). Finely powdered K2CO3 (691 mg, 5.00 mmol) was added and the stirring was continued until palladacycle formation was complete, as indicated by the formation of a canary yellow solution (5-10 min). IMesetaCl (375 mg, 1.10 mmol) was added and the mixture was stirred at 8O0C over 18h. The reaction mixture was filtered and evaporated. The resulting product was purified by column chromatography. Upon application of the product to a pad of silica gel (2.5 x 8 cm) pre-equilibrated with CH2CI2, CH2CI2 (100 mL) was used to elute impurities. The pure NHC-palladacycles were eluted with CH2Cl2-ethylacetate (3:1, vol/vol, 150 mL), and the solvent was evaporated. The products were triturated with hexanes (25 mL). After drying in high vacuum, IMes-Pd(dmba)Cl (555 mg, 96%) was obtained as beige solid. 1H NMR (CDCl3, 400 MHz) delta: 7.10 (s, 2H), 6.99 (s, 2H), 6.83-6.76 (m, 4H), 6.70 (td, J= 7.6, 1.2 Hz, IH), 6.58 (d, J= 7.2, 1.2 Hz, IH), 3.53 (s, 2H), 2.45 (s, 6H), 2.44 (s, 6H), 2.29 (s, 6H), 2.23 (s, 6H). 13C NMR (CDCl3, 100 MHz) delta: 175.6, 149.3, 147.6, 138.3, 138.3, 137.4, 136.2, 133.9, 129.4, 128.7, 123.9, 123.2, 123.0, 121.2, 72.2, 50.0, 21.1, 20.2, 19.8. Anal, calcd for C30H37ClN3Pd (581.51): C, 61.96; H, 6.41; N, 7.23. Found: C, 62.02; H, 6.37; N, 7.40., 141556-45-8

141556-45-8 1,3-Dimesityl-1H-imidazol-3-ium chloride 2734211, achiral-catalyst compound, is more and more widely used in various fields.

Reference£º
Patent; AGENCY FOR SCIENCE, TECHNOLOGY AND RESEARCH; WO2008/156451; (2008); A1;,
Chiral Catalysts
Chiral catalysts – SlideShare

141556-45-8, 1,3-Dimesityl-1H-imidazol-3-ium chloride is a chiral-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: The silver(I) N-heterocyclic carbene complexes Ag(I)-NHCs were synthesized according to the Lin?s Ag2O method. To a solution of 1 mmol of NHC precursors (1,3-disubstituted imidazolinium chloride salts) in 5 mL of DCM, 0.5 mmol of Ag2O was added and the mixture was stirred at room temperature for 18 h. Later the reaction mixture was filtered through a celite and concentrated under vacuo to obtain the desired Ag(I)-NHC catalysts as a white crystalline solids.

141556-45-8, As the paragraph descriping shows that 141556-45-8 is playing an increasingly important role.

Reference£º
Article; Thirukovela, Narasimha Swamy; Balaboina, Ramesh; Kankala, Shravankumar; Vadde, Ravindhar; Vasam, Chandra Sekhar; Tetrahedron; vol. 75; 18; (2019); p. 2637 – 2641;,
Chiral Catalysts
Chiral catalysts – SlideShare

22795-99-9, (S)-(1-Ethylpyrrolidin-2-yl)methanamine is a chiral-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: Step 2. 3-(Benzylamino)- or 3-(arylamino)-4-methoxycyclobut-3-ene-1,2-dione 18a ? 18f (1.0 equiv.) was suspended in MeOH (0.07 M) and the amine 19a, 19b or 19c (1.0 equiv.) was added. The resulting mixture was stirred at ambient temperature for 24 hours. The mixture was then filtered and the collected solid residue was washed with ice-cold MeOH and dried in vacuo to afford the corresponding squaramides 1 ? 6., 22795-99-9

As the paragraph descriping shows that 22795-99-9 is playing an increasingly important role.

Reference£º
Article; Kristianslund, Renate; Aursnes, Marius; Tungen, J¡ãrn Eivind; Hansen, Trond Vidar; Tetrahedron Letters; vol. 57; 47; (2016); p. 5232 – 5236;,
Chiral Catalysts
Chiral catalysts – SlideShare

14098-24-9, Benzo-18-crown 6-Ether is a chiral-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: The carbonyl substrate (0.1 g) is dissolved in 1-2 mL of anhydrous CHCl3 and 2.0 equiv of a benzocrown ether is added to the solution. To this mixture, CF3SO3H (8.0 equiv; H2SO4 may be used in some cases) is added dropwise with stirring. The reaction is stirred at room temperature for at least 2 h, after which, the mixture is poured over several grams of ice. The resulting solution is extracted three times with CHCl3. The organic phase is subsequently washed three times with water and dried over MgSO4 solution. Removal of the solvent provides the product.

14098-24-9, As the paragraph descriping shows that 14098-24-9 is playing an increasingly important role.

Reference£º
Article; Zielinski, Matthew E.; Tracy, Adam F.; Klumpp, Douglas A.; Tetrahedron Letters; vol. 53; 14; (2012); p. 1701 – 1704;,
Chiral Catalysts
Chiral catalysts – SlideShare