Category: chiral-catalyst

The chiral-catalyst compound, cas is 250285-32-6 name is 1,3-Bis(2,6-diisopropylphenyl)imidazolium chloride, mainly used in chemical industry, its synthesis route is as follows.,250285-32-6

General procedure: Under a N2 atmosphere, a mixture of imidazolium salts 1(0.225 mmol), PdCl2 (0.15 mmol), K2CO3 (0.45 mmol) and picolinicacid 2 (0.15 mmol) was stirred in anhydrous THF (2.0 mL) underreux for 12 h. Then the solvent was removed under reducedpressure, and the residue was puried by ash column chroma-tography (SiO2) to give complexes 3 as yellow solids. 4.2.1.1. Compound 3a. yellow solid. m.p. 248C (decomposed).1HNMR (500 MHz, CDCl3, TMS) d 8.55 (d, J 5.5 Hz, 1H), 7.83e7.77 (m,2H), 7.49 (t, J 7.5 Hz, 2H), 7.34 (d, J 7.5 Hz, 4H), 7.31e7.28 (m,1H),7.17 (s, 2H), 2.95 (hept, J 7.0 Hz, 4H), 1.42 (d, J 7.0 Hz, 12H), 1.14(d, J 7.0 Hz, 12H).13C NMR (125 MHz, CDCl3) d 172.7, 157.4, 151.3,146.8, 146.5, 139.1, 134.5, 130.4, 126.6, 126.2, 125.1, 124.0, 28.6, 26.2,22.9. IR (neat) n 2964, 1668, 1600, 1458, 1408, 1337, 1291, 1047, 944,800, 771, 755, 713 cm1. HRMS (ESI) calcd for C33H41ClN3O2Pd[MH]: 654.1920; found: 654.1917. Anal. calcd forC33H40ClN3O2Pd: C, 60.47%; H, 6.18%; N, 6.44%; found: C, 60.62%; H,6.11%; N, 6.31%.

With the rapid development of chemical substances, we look forward to future research findings about 250285-32-6

Reference£º
Article; Zhang, Zhi-Mao; Gao, Yu-Jue; Lu, Jian-Mei; Tetrahedron; vol. 73; 52; (2017); p. 7308 – 7314;,
Chiral Catalysts
Chiral catalysts – SlideShare

The chiral-catalyst compound, cas is 22795-99-9 name is (S)-(1-Ethylpyrrolidin-2-yl)methanamine, mainly used in chemical industry, its synthesis route is as follows.,22795-99-9

25.9 g of ethyl 2-methoxy-5-sulfamoylbenzoate,(S) 1-ethyl-2-aminomethyltetrahydropyrrolidine 15g and isopropanol 20g were added to the reaction flask,The reaction was carried out at 80 ¡ã C for 36 hours, the reaction was completed, and 10 g of ethanol was added.Stir under reflux for 10 minutes, cool to 5 ¡ã C and stir for 1 hour.It was filtered, washed with ethanol and dried at 65 ¡ãC. The yield was 90.3percent and the purity was 99.1percent.

As the rapid development of chemical substances, we look forward to future research findings about 22795-99-9

Reference£º
Patent; Jiangsu Tianshili Diyi Pharmaceutical Co., Ltd.; Liu Jinping; Liu Wenzheng; Zhu Zhanyuan; Yang Guojun; (5 pag.)CN103804265; (2018); B;,
Chiral Catalysts
Chiral catalysts – SlideShare

141556-45-8, 1,3-Dimesityl-1H-imidazol-3-ium chloride is a chiral-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: A 20 mL vial was charged with the NHC¡¤HCl (300 mg, 1 equiv.) and the zinc salt (1 equiv.). Tetrahydrofuran (5 mL) was added, the vial was sealed with a screw-cap and the reaction was stirred at 60C for two hours. The mixture was allowed to reach room temperature and the solvent was removed under reduced pressure toafford the desired product., 141556-45-8

141556-45-8 1,3-Dimesityl-1H-imidazol-3-ium chloride 2734211, achiral-catalyst compound, is more and more widely used in various.

Reference£º
Article; Santoro, Orlando; Nahra, Fady; Cordes, David B.; Slawin, Alexandra M.Z.; Nolan, Steven P.; Cazin, Catherine S.J.; Journal of Molecular Catalysis A: Chemical; vol. 423; (2016); p. 85 – 91;,
Chiral Catalysts
Chiral catalysts – SlideShare

250285-32-6, 1,3-Bis(2,6-diisopropylphenyl)imidazolium chloride is a chiral-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: In air, to a Schlenk tube that closed with a screw cap fitted with a septum and was equipped with a magnetic stir bar were added in turn NHC¡¤HCl (1.1 mmol, 468 mg), PdCl2 (1.0 mmol, 177 mg), Cs2CO3 (5 mmol, 1.63 g), and 2-nicotinic acid (1.1 mmol, 136 mg). The tube was then caped with a rubber septum and evacuated and backfilled with argon. This sequence was repeated three times. 1,4-Dioxane (10 mL) was injected through the septum. The mixture was then stirred at a pre-heated oil bath (80 C) for 20 h. The reaction mixture was cooled to room temperature and CH2Cl2 (25 mL) added. After filtration via a short pad of celite, the filtrate was condensed under vacuum and the residue was purified by flash chromatography on silica gel to provide the desired 1 and 2., 250285-32-6

The synthetic route of 250285-32-6 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Li, Yan-Jing; Zhang, Jin-Ling; Li, Xiao-Jian; Geng, Yu; Xu, Xiao-Hua; Jin, Zhong; Journal of Organometallic Chemistry; vol. 737; (2013); p. 12 – 20;,
Chiral Catalysts
Chiral catalysts – SlideShare

The chiral-catalyst compound, cas is 33100-27-5 name is 1,4,7,10,13-Pentaoxacyclopentadecane, mainly used in chemical industry, its synthesis route is as follows.,33100-27-5

General procedure: A solution of (2 mmol, 0.4 ml) of 15-crown-5 in (10 ml) of absolute ethanol was added to a solution of (1 mmol, 0.933 gm Pr-picrate), (0.936 gm Nd-picrate) and (0.900 gm Dy-picrate) in (10 ml) of absolute ethanol and refluxed at (50 ? 60 oC) for (1 hr.). The solution was concentrated at (40 ? 50 oC) to a very small volume (till the formation of a precipitate), usually a gummy precipitate forms which was treated with (40 ? 60 oC) petroleum ether until all the gummy precipitate was converted to a fine yellow ? orange powder. The precipitate was collected and stored in a desicator for complete dryness. These complexes were also prepared by another method, by stirring a solution of 15-crown-5 with a solution of lanthanide picrate for (24 ? 48 hrs.). The gummy precipitates were treated with petroleum ether. The yields were (92 ? 96percent)24.

As the rapid development of chemical substances, we look forward to future research findings about 33100-27-5

Reference£º
Article; Al-Amery, Mohammed H. A.; Al-Abdaly, B. Ibrahim; Albayaty, M. Kahtan; Oriental Journal of Chemistry; vol. 32; 2; (2016); p. 1025 – 1048;,
Chiral Catalysts
Chiral catalysts – SlideShare

The chiral-catalyst compound, cas is 141556-45-8 name is 1,3-Dimesityl-1H-imidazol-3-ium chloride, mainly used in chemical industry, its synthesis route is as follows.,141556-45-8

Tris [4- (pyridin-4-yl) phenyl] amine compound (47.6 mg, 0.10 mmol)1,3-bis (2,4,6-trimethylphenyl) imidazole chloride(IMes. HCl) (102.1 mg, 0.30 mmol),PdCl2 (53.2 mg, 0.30 mmol)And potassium carbonate (41.5 mg, 0.30 mmol) were added to a 25 mL single neck flask,Tetrahydrofuran (5 mL) was then added,The reaction was stirred at 75 C for 14 h under argon atmosphere.Stop the reaction,Cool to room temperature,concentrate,Thin layer chromatography to give compound II,Yield 50%.

As the rapid development of chemical substances, we look forward to future research findings about 141556-45-8

Reference£º
Patent; Shangqiu Normal University; Wang Tao; Xu Kai; Liu Lantao; Zhao Wenxian; Liu Shuang; Li Feng; Meng Tuanjie; Xie Huanping; (12 pag.)CN105131044; (2017); B;,
Chiral Catalysts
Chiral catalysts – SlideShare

The chiral-catalyst compound, cas is 33100-27-5 name is 1,4,7,10,13-Pentaoxacyclopentadecane, mainly used in chemical industry, its synthesis route is as follows.,33100-27-5

EXAMPLE 8 Synthesis of 4-(4-fluorobenzylidene)piperidine hydrochloride To a stirred suspension of 13.20 g of 60percent sodium hydride (in oil) containing 1.65 g of 15-crown-5 ether in 650 ml of tetrahydrofuran were added dropwise a solution of 59.78 g of N-t-butoxycarbonylpiperidone and 81.25 g of diethyl 4-fluorobenzylphosphonate in 150 ml of tetrahydrofuran under ice-cooling over 20 minutes. After stirring at room temperature for a day, a saturated aqueous sodium bicarbonate solution was added cautiously, followed by extracting with ethyl acetate. The extract was washed with a saturated aqueous sodium bicarbonate solution and a saturated aqueous sodium chloride solution, successively, and dried over anhydrous sodium sulfate, followed by removal of the drying agent by filtration. The filtrate was concentrated under reduced pressure and purified by a flash column chromatography (silica gel: Wakogel C200 (manufactured by Wako Pure Chemicals), eluent; hexane-ethyl acetate =20:1) to give 55.23 g of N-t-butoxycarbonyl-4-(4-fluorobenzylidene)piperidine as an oil, which was then crystallized by allowing to stand at room temperature overnight. m.p. 69-70¡ãC. To 55.00 g of N-t-butoxycarbonyl-4-(4-fluorobenzylidene)piperidine was added 475 ml of an ice-cooled solution of 4 N hydrogen chloride in dioxane, followed by stirring at room temperature for 2 hours. The reaction solution was concentrated under reduced pressure, and the resulting crystals were recrystallized from isopropanol to give 40.72 g of 4-(4-fluorobenzylidene)piperidine hydrochloride. m.p. 184-185.5¡ã C.

As the rapid development of chemical substances, we look forward to future research findings about 33100-27-5

Reference£º
Patent; Taisho Pharmaceutical Co., Ltd.; Nihon Nohyaku Co. Ltd.; US6291467; (2001); B1;,
Chiral Catalysts
Chiral catalysts – SlideShare

63126-47-6, (S)-2-(Methoxymethyl)pyrrolidine is a chiral-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,63126-47-6

Step 2: (S)-ferf-Butyl 2-(4-((2-(methoxymethyl)pyrrolidin-l-yl)methyl)benzamido)-4-(thiophen- 2-yl)phenylcarbamate (75); [0708] To a solution of chloride 74 (0.30 g, 0.68 mmol) in DCM (7 mL) was added (S)-2- (methoxymethyl)pyrrolidine (86 mg, 0.75 mmol), K2CO3 (0.31 g, 2.24 mmol) and NaI (12 mg, 0.075 mmol). Acetone (3 mL) was added and the reaction mixture was heated to reflux for 3 days then concentrated. The residue was taken up in AcOEt, washed with H2O, brine, dried overMgSO4, filtered and concentrated to give title compound 75 (0.323 g, 91percent yield).[0709] 1H NMR (DMSO-de) delta (ppm): 9.87 (s, IH), 8.72 (s, IH), 7.91 (d, J= 8.4 Hz, 2H),7.80 (d, J= 2.2 Hz, IH), 7.59 (d, J= 8.6 Hz, IH), 7.51 (dd, J= 4.9, 1.0 Hz, IH), 7.49 (dd, J= 8.4,2.3 Hz, IH), 7.45 (d, J= 8.6 Hz, 2H), 7.44 (dd, J= 3.7, 1.0 Hz, IH), 7.11 (dd, J= 12.5 Hz, IH),3.39 (q, J= 5.7 Hz, IH), 2.79 to 2.75 (m, IH), 2.73 to 2.67 (m, IH), 2.15 (q, J= 7.6 Hz, IH), 1.86(dq, J= 11.9, 7.8 Hz, IH), 1.66 to 1.58 (m, IH), 1.54 to 1.46 (m, IH), 1.44 (s, 9H).

As the paragraph descriping shows that 63126-47-6 is playing an increasingly important role.

Reference£º
Patent; METHYLGENE INC.; WO2007/118137; (2007); A1;,
Chiral Catalysts
Chiral catalysts – SlideShare

1,3-Bis(2,6-diisopropylphenyl)imidazolium chloride, cas is 250285-32-6, it is a common heterocyclic compound, the chiral-catalyst compound, its synthesis route is as follows.,250285-32-6

General procedure: Under an N2 atmosphere, the mixture of imidazolium salts 1 (1.1 mmol), benzoxazole or benzothiazole (2.0 mmol), PdCl2 (1.0 mmol) and K2CO3 (1.1 mmol) was stirred in anhydrous THF (10 mL) under reflux for 16 h. After cooling, filtration and evaporation,the residue was purified by preparative TLC on silica gelplates eluting with CH2Cl2 to afford the corresponding N-heterocyclic carbene-palladium(II) complexes 3a-d.

With the rapid development of chemical substances, we look forward to future research findings about 250285-32-6

Reference£º
Article; Wang, Tao; Xie, Huanping; Liu, Lantao; Zhao, Wen-Xian; Journal of Organometallic Chemistry; vol. 804; (2016); p. 73 – 79;,
Chiral Catalysts
Chiral catalysts – SlideShare

6,6′-((1E,1’E)-((2,3-Dimethylbutane-2,3-diyl)bis(azanylylidene))bis(methanylylidene))bis(2,4-di-tert-butylphenol), cas is 351498-10-7, it is a common heterocyclic compound, the chiral-catalyst compound, its synthesis route is as follows.,351498-10-7

In a nitrogen atmosphere, add to the reactor,2,2 ‘-[(1,1,2,2-tetramethyl-1,2-ethylenediyl) bis (nitromethyl)] bis [4,6-bis (1,1-dimethyl (Ethyl)] phenol, 16.46g (30mmol),21.6 g (152 mmol) of boron trifluoride-ether complex,300ml toluene20 g (152 mmol) of N, N-diisopropylethylamine was stirred with heating at 40 C for 2.5 hours.Cool to room temperature, add 300ml of water, and separate the filtrate into organic and aqueous layers.The organic layer was washed twice with a saturated sodium carbonate aqueous solution and dried over magnesium sulfate.The obtained solid was recrystallized from toluene (150 ml) and ethanol (750 ml),This gave 18.78 g of crude product. The crude product is under pressure 3 ¡Á 10-3Pa,Sublimation at a temperature of 225 C gave compound [69] (light yellow solid).

With the rapid development of chemical substances, we look forward to future research findings about 351498-10-7

Reference£º
Patent; TORAY ADVANCED MATERIALS RESEARCH LABORATORIES (CHINA) CO., LTD.; WAN, PENG; JIN, GUANGNAN; IKEDA, TAKESHI; LI, JINCAI; TANAKA, DAISAKU; (48 pag.)TW2019/25212; (2019); A;,
Chiral Catalysts
Chiral catalysts – SlideShare