Can You Really Do Chemisty Experiments About 2,2-Biphenol

1806-29-7, Interested yet? Read on for other articles about 1806-29-7!

Chemistry is the science of change. But why do chemical reactions take place? Why do chemicals react with each other? The answer is in thermodynamics and kinetics.In a document type is Article, the author is Chen, Zhengwang and a compound is mentioned, 1806-29-7, 2,2-Biphenol, introducing its new discovery. 1806-29-7

Formal Direct Cross-Coupling of Phenols with Amines

The transition-metal-catalyzed amination of aryl halides has been the most powerful method for the formation of aryl amines over the past decades. Phenols are regarded as ideal alternatives to aryl halides as coupling partners in cross-couplings. An efficient palladium-catalyzed formal cross-coupling of phenols with various amines and anilines has now been developed. A variety of substituted phenols were compatible with the standard reaction conditions. Secondary and tertiary aryl amines could thus be synthesized in moderate to excellent yields.

1806-29-7, Interested yet? Read on for other articles about 1806-29-7!

Reference£º
Chiral Catalysts,
Chiral catalysts – SlideShare

 

Analyzing the synthesis route of 22795-99-9

22795-99-9 (S)-(1-Ethylpyrrolidin-2-yl)methanamine 643457, achiral-catalyst compound, is more and more widely used in various fields.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.22795-99-9,(S)-(1-Ethylpyrrolidin-2-yl)methanamine,as a common compound, the synthetic route is as follows.

22795-99-9, 0.51 g (1.5 mmol) of compound 1a prepared in Preparation 6 was dissolved in 10 ml of anhydrous toluene, 0.39 ml of thionyl chloride was added,The mixture was heated at 60 ¡ã C under argon for 1 hour and then evaporated to dryness. 10 ml of anhydrous DCM (methylene chloride)(S) -2-aminomethyl-1-ethylpyrrole under ice-water bath, the reaction was stirred at room temperature for 8 hours and then diluted with 50 ml of DCM, washed with saturated aqueous NaHCO 3 solution,Saturated NaCl aqueous solution were washed three times, the organic layer was dried over Na2SO4, filtered and evaporated to give a yellowish oil, medium pressure silica gel column,Mobile phase petroleum ether: ethyl acetate 2: 1, the product fractions were collected and evaporated to dryness to give a yellowish oil 0.6g, yield 88.6percent.

22795-99-9 (S)-(1-Ethylpyrrolidin-2-yl)methanamine 643457, achiral-catalyst compound, is more and more widely used in various fields.

Reference£º
Patent; Beijing Nerve Surgical Department Institute; Liu Qian; Zhang Yazhuo; Yang Xiaoxiao; CN106366075; (2017); A;,
Chiral Catalysts
Chiral catalysts – SlideShare

 

The important role of 2133-34-8

With the complex challenges of chemical substances, we look forward to future research findings about (S)-Azetidine-2-carboxylic acid

Name is (S)-Azetidine-2-carboxylic acid, as a common heterocyclic compound, it belongs to chiral-catalyst compound, and cas is 2133-34-8, its synthesis route is as follows.,2133-34-8

Step A. N-(2-Thiophene-sulfonyl)-azetidine-2(S)-carboxylic Acid To a magnetically stirred mixture of azetidine-2(S)-carboxylic acid (1.0 g, 10 mmol) and Na2CO3 (2.1 g, 20 mmol) in 30 mL of water at 0 C. was added thiophene-2-sulfonyl chloride (1.8 g, 10 mmol), and the reaction was allowed to slowly warm up to room temperature overnight. The reaction was quenched by careful addition of concentrated HCl at 0 C. to pH above 2, and the product was extracted with EtOAc (3*15 mL). The extracts were dried over Na2SO4, and concentrated to dryness to provide the title compound as a white solid, which is >90% pure by 1H-NMR and used without further purification. 400 MHz 1H NMR (CD3OD): delta 2.2-2.4 (m, 2H), 3.7-3.9 (m, 2H), 4.42 (dd, 1H), 7.30 (dd, 1H), 7.75 (dd, 1H), 7.95 (dd, 1H).

With the complex challenges of chemical substances, we look forward to future research findings about (S)-Azetidine-2-carboxylic acid

Reference£º
Patent; Merck & Co., Inc.; US6645939; (2003); B1;,
Chiral Catalysts
Chiral catalysts – SlideShare

 

New learning discoveries about 673-06-3

The synthetic route of 673-06-3 has been constantly updated, and we look forward to future research findings.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.673-06-3,D-Phenylalanine,as a common compound, the synthetic route is as follows.

673-06-3, (R)-2-Amino-3-phenylpropionic acid (5.3 g, 32 mmol) was placed into a three- necked flask, and water (24 mL) was added. The flask was fitted with two addition funnels. 2N H2SO4 (18 mL) was placed in one addition funnel and 2N aqueous NaNO2 (18 mL) was placed in the other one. The reaction vessel was cooled to 0C, and the acid was added dropwise with stirring. After the initial amino acid was dissolved, dropwise addition of the NaNO2 solution started. Upon completion of the addition, the reaction was stirred at 0C for 3 hours and then allowed to stir at room temperature for 2 days. Then the reaction mixture was extracted several times with ethyl acetate. The combined organic layers were dried, filtered and concentrated under reduced pressure to give E51 (3.6 g, 68% yield) as a white solid.

The synthetic route of 673-06-3 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; PHENOMIX CORPORATION; BETANCORT, Juan Manuel; HEPPERLE, Michael E.; CAMPBELL, David Alan; WINN, David T.; WO2010/33466; (2010); A1;,
Chiral Catalysts
Chiral catalysts – SlideShare

 

Brief introduction of 673-06-3

673-06-3 D-Phenylalanine 71567, achiral-catalyst compound, is more and more widely used in various fields.

673-06-3, D-Phenylalanine is a chiral-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

673-06-3, (R)-phenylalanine (4.2 g, 25 mmol) was sequentially added to the dry reaction flask.Water (30mL),1,4-dioxane(30mL) andSodium bicarbonate (5.1 g, 61 mmol),After the mixture was stirred for 10 minutes,Add (Boc) 2O (10.1g,45.8mmol),The resulting mixture was stirred at room temperature for 24 h.After the reaction, the solvent was distilled off under reduced pressure, the resulting residue was washed with water (20mL) and EtOAc (100mL) was diluted with 1M HCl and then adjusted to pH 6-7, was allowed to stand, and the organic layer was washed with water and saturated brine, dried over anhydrous sulfate Dry the sodium, filter, and distill off the solvent under reduced pressure.The title compound was obtained as a colorless oil (6.0 g, 91%)

673-06-3 D-Phenylalanine 71567, achiral-catalyst compound, is more and more widely used in various fields.

Reference£º
Patent; Guangdong Dongyangguang Pharmaceutical Co., Ltd.; Liu Xinchang; Ren Qingyun; Yan Guanghua; S ¡¤geerdeman; Zhang Yingjun; (200 pag.)CN109678859; (2019); A;,
Chiral Catalysts
Chiral catalysts – SlideShare

 

Share a compound : D-Phenylalanine

673-06-3 is used more and more widely, we look forward to future research findings about D-Phenylalanine

D-Phenylalanine, cas is 673-06-3, it is a common heterocyclic compound, the chiral-catalyst compound, its synthesis route is as follows.,673-06-3

General procedure: L-Phenylalanine (1.5 g, 9.08 mmol, 1eq.) was suspended in 30 mL of NaOH (0.39 g, 9.98 mmol, 1.1 eq.) solution and the reaction mixture was diluted with tert-butanol. To this, di-tert-butyl pyrocarbonate (2.63 mL, 10.89 mmol, 1.2 eq) was added drop-wise with constant stirring. Reaction mixture was stirred at room temperature for overnight. Next day the reaction mixture was extracted with pentane and the organic phase is extracted with saturated NaHCO3 solution (315 mL). The combined aqueous layer was acidified to pH 2 with 1N HCl solution. The acidified layer was extracted with ethyl acetate (3×25 mL) and washed with brine solution (2×15 mL). The organic layer was dried over anhydrous sodium sulphate and concentrated to give the product (2.1 g, 87.5 % yield)

673-06-3 is used more and more widely, we look forward to future research findings about D-Phenylalanine

Reference£º
Article; Kumar, Vikas; Krishna, K. Vijaya; Khanna, Shruti; Joshi, Khashti Ballabh; Tetrahedron; vol. 72; 35; (2016); p. 5369 – 5376;,
Chiral Catalysts
Chiral catalysts – SlideShare

 

Analyzing the synthesis route of 22795-99-9

22795-99-9 (S)-(1-Ethylpyrrolidin-2-yl)methanamine 643457, achiral-catalyst compound, is more and more widely used in various fields.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.22795-99-9,(S)-(1-Ethylpyrrolidin-2-yl)methanamine,as a common compound, the synthetic route is as follows.

22795-99-9, 0.51 g (1.5 mmol) of compound 1a prepared in Preparation 6 was dissolved in 10 ml of anhydrous toluene, 0.39 ml of thionyl chloride was added,The mixture was heated at 60 ¡ã C under argon for 1 hour and then evaporated to dryness. 10 ml of anhydrous DCM (methylene chloride)(S) -2-aminomethyl-1-ethylpyrrole under ice-water bath, the reaction was stirred at room temperature for 8 hours and then diluted with 50 ml of DCM, washed with saturated aqueous NaHCO 3 solution,Saturated NaCl aqueous solution were washed three times, the organic layer was dried over Na2SO4, filtered and evaporated to give a yellowish oil, medium pressure silica gel column,Mobile phase petroleum ether: ethyl acetate 2: 1, the product fractions were collected and evaporated to dryness to give a yellowish oil 0.6g, yield 88.6percent.

22795-99-9 (S)-(1-Ethylpyrrolidin-2-yl)methanamine 643457, achiral-catalyst compound, is more and more widely used in various fields.

Reference£º
Patent; Beijing Nerve Surgical Department Institute; Liu Qian; Zhang Yazhuo; Yang Xiaoxiao; CN106366075; (2017); A;,
Chiral Catalysts
Chiral catalysts – SlideShare

The important role of 2133-34-8

With the complex challenges of chemical substances, we look forward to future research findings about (S)-Azetidine-2-carboxylic acid

Name is (S)-Azetidine-2-carboxylic acid, as a common heterocyclic compound, it belongs to chiral-catalyst compound, and cas is 2133-34-8, its synthesis route is as follows.,2133-34-8

Step A. N-(2-Thiophene-sulfonyl)-azetidine-2(S)-carboxylic Acid To a magnetically stirred mixture of azetidine-2(S)-carboxylic acid (1.0 g, 10 mmol) and Na2CO3 (2.1 g, 20 mmol) in 30 mL of water at 0 C. was added thiophene-2-sulfonyl chloride (1.8 g, 10 mmol), and the reaction was allowed to slowly warm up to room temperature overnight. The reaction was quenched by careful addition of concentrated HCl at 0 C. to pH above 2, and the product was extracted with EtOAc (3*15 mL). The extracts were dried over Na2SO4, and concentrated to dryness to provide the title compound as a white solid, which is >90% pure by 1H-NMR and used without further purification. 400 MHz 1H NMR (CD3OD): delta 2.2-2.4 (m, 2H), 3.7-3.9 (m, 2H), 4.42 (dd, 1H), 7.30 (dd, 1H), 7.75 (dd, 1H), 7.95 (dd, 1H).

With the complex challenges of chemical substances, we look forward to future research findings about (S)-Azetidine-2-carboxylic acid

Reference£º
Patent; Merck & Co., Inc.; US6645939; (2003); B1;,
Chiral Catalysts
Chiral catalysts – SlideShare

New learning discoveries about 673-06-3

The synthetic route of 673-06-3 has been constantly updated, and we look forward to future research findings.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.673-06-3,D-Phenylalanine,as a common compound, the synthetic route is as follows.

673-06-3, (R)-2-Amino-3-phenylpropionic acid (5.3 g, 32 mmol) was placed into a three- necked flask, and water (24 mL) was added. The flask was fitted with two addition funnels. 2N H2SO4 (18 mL) was placed in one addition funnel and 2N aqueous NaNO2 (18 mL) was placed in the other one. The reaction vessel was cooled to 0C, and the acid was added dropwise with stirring. After the initial amino acid was dissolved, dropwise addition of the NaNO2 solution started. Upon completion of the addition, the reaction was stirred at 0C for 3 hours and then allowed to stir at room temperature for 2 days. Then the reaction mixture was extracted several times with ethyl acetate. The combined organic layers were dried, filtered and concentrated under reduced pressure to give E51 (3.6 g, 68% yield) as a white solid.

The synthetic route of 673-06-3 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; PHENOMIX CORPORATION; BETANCORT, Juan Manuel; HEPPERLE, Michael E.; CAMPBELL, David Alan; WINN, David T.; WO2010/33466; (2010); A1;,
Chiral Catalysts
Chiral catalysts – SlideShare

Brief introduction of 673-06-3

673-06-3 D-Phenylalanine 71567, achiral-catalyst compound, is more and more widely used in various fields.

673-06-3, D-Phenylalanine is a chiral-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

673-06-3, (R)-phenylalanine (4.2 g, 25 mmol) was sequentially added to the dry reaction flask.Water (30mL),1,4-dioxane(30mL) andSodium bicarbonate (5.1 g, 61 mmol),After the mixture was stirred for 10 minutes,Add (Boc) 2O (10.1g,45.8mmol),The resulting mixture was stirred at room temperature for 24 h.After the reaction, the solvent was distilled off under reduced pressure, the resulting residue was washed with water (20mL) and EtOAc (100mL) was diluted with 1M HCl and then adjusted to pH 6-7, was allowed to stand, and the organic layer was washed with water and saturated brine, dried over anhydrous sulfate Dry the sodium, filter, and distill off the solvent under reduced pressure.The title compound was obtained as a colorless oil (6.0 g, 91%)

673-06-3 D-Phenylalanine 71567, achiral-catalyst compound, is more and more widely used in various fields.

Reference£º
Patent; Guangdong Dongyangguang Pharmaceutical Co., Ltd.; Liu Xinchang; Ren Qingyun; Yan Guanghua; S ¡¤geerdeman; Zhang Yingjun; (200 pag.)CN109678859; (2019); A;,
Chiral Catalysts
Chiral catalysts – SlideShare