Tag: M.W:100-200

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.22795-99-9,(S)-(1-Ethylpyrrolidin-2-yl)methanamine,as a common compound, the synthetic route is as follows.

A mixture of 2-fluoro-5-(1-trityl-1H-benzotriazol-5-yl)-benzaldehyde (368 mg, 0.76 mmol), (S)-(+)-1-ethyl-2-aminomethylpyrrolidine (120 mg, 0.83 mmol) and molecular sieves in 10 mL of methanol was stirred at ambient temperature for 3 h. The mixture was cooled to -78¡ã C., and sodium borohydride (72 mg, 1.9 mmol) was added and the mixture was allowed to warm to room temperature and stirred overnight. The volatiles were removed in vacuo and the residue was diluted with dichloromethane and washed with water. The aqueous phase extracted with dichloromethane, and the combined organic phases were washed with brine, dried over magnesium sulfate, filtered and concentrated to leave the crude product. Chromatography (elution with methanol/dichloromethane) gave 255 mg of product., 22795-99-9

As the paragraph descriping shows that 22795-99-9 is playing an increasingly important role.

Reference£º
Patent; AVENTIS PHARMACEUTICALS INC.; US2008/138413; (2008); A1;,
Chiral Catalysts
Chiral catalysts – SlideShare

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1121-22-8,trans-Cyclohexane-1,2-diamine,as a common compound, the synthetic route is as follows.

Into a solution containing 1,6-diisocyanatohexane (4.04 grams, 24.0 mmol; obtained from Sigma-Aldrich Fine Chemicals) and anhydrous tetrahydrofuran (100 mL, obtained from Sigma-Aldrich Fine Chemicals) stirring at room temperature was added 1-octanol (3.13 grams, 24.0 mmol, obtained from Sigma-Aldrich Fine Chemicals) and dibutyltin dilaurate (0.15 grams, 0.24 mmol, obtained from Sigma-Aldrich Fine Chemicals) as the catalyst. The mixture was stirred and heated to an internal temperature of about 65 C. The progress of the reaction was monitored by 1H-NMR spectroscopy for the consumption of 1-octanol starting material, indicated by the disappearance of the -CH2OH multiplet, which appears at 3.6 ppm downfield of the intermediate isocyanate product whose signal is located at 3.35 ppm. The mixture was cooled to about 15 C. internal temperature; thereafter, to this mixture was added dropwise a solution of trans-1,2-diaminocyclohexane (1.37 grams, 12 mmol; obtained as a racemic mixture of (1R,2R) and (1S,2S) stereoisomers from Sigma-Aldrich Fine Chemicals) dissolved in anhydrous tetrahydrofuran (10 mL). The mixture was stirred for about 60 minutes while warming up to room temperature, and thickened to form a gelatinous slurry. FTIR spectroscopic analysis of a reaction sample showed very little unreacted isocyanate (peak at 2180 cm-1, sample prepared as a KBr pellet). Residual isocyanate was quenched by addition of 5 mL of methanol. A crystalline product was isolated from the slurry by first adding diethyl ether (20 mL) followed with stirring for approximately 30 minutes to ensure full precipitation out of the gel slurry. The solid was filtered by suction on a paper filter, rinsed with diethyl ether, and then dried in air to give 6.20 grams of off-white solid (77.5% yield). The product was believed to be of the formulae 1H-NMR spectroscopic analysis of the solid was performed in DMSO-d6 (300 MHz) at high temperature (60 C.) and indicated the above structure with the following assigned peaks: 0.90 ppm (multiplet, 3 H integration, -OCH2(CH2)6CH3); 1.05-1.95 ppm (broad multiplets, 24 H integration, 12 methylene protons from 2-ethylhexanol portion, 8 methylene protons from the 1,6-diisocyanatohexane portion, and 4 methylene protons from the cyclohexane ring portion); 2.95 ppm (narrow multiplet, 4 H integration, -NH(CO)NHCH2(CH2)4CH2NH(CO)O); 3.35 ppm (doublet, 1 H integration, tertiary methine proton adjacent to urea group on cyclohexane ring); 3.90 ppm (doublet of doublets, 2 H integration, NH(CO)OCH2(CH2)6CH3; 5.70 ppm and 5.85 ppm (each a broad singlet, 1 H integration, urea NH protons); 7.00 ppm (broad singlet, 1 H integration, urethane NH proton). Elemental analysis calculated for C: 64.19%, H: 10.49%, N: 11.82%; found for C: 64.46%, H: 10.63%, N: 10.69%.

1121-22-8, 1121-22-8 trans-Cyclohexane-1,2-diamine 43806, achiral-catalyst compound, is more and more widely used in various fields.

Reference£º
Patent; Xerox Corporation; US2006/122415; (2006); A1;,
Chiral Catalysts
Chiral catalysts – SlideShare

D-Phenylalanine, cas is 673-06-3, it is a common heterocyclic compound, the chiral-catalyst compound, its synthesis route is as follows.,673-06-3

General procedure: D-amino acid (10 mmol) was dissolved in 60 mL of dry methanol. Under an argon atmospherepotassium carbonate (40 mmol) and CuSO4 ¡Á 5H2O (0.1 mmol) were added and the mixture wasstirred for 15 min. 1H-imidazole-1-sulfonyl azide hydrochloride (12 mmol) was added over a periodof 30 min and the resulting mixture was stirred for 17 h at ambient temperature and under an argonatmosphere. Methanol was removed under reduced pressure and 50 mL of water was added to thecrude product. The pH was adjusted to 3 with 1 M HCl and extracted with ethyl acetate (3 ¡Á 40 mL).The organic phase was washed with brine (1 ¡Á 30 mL), dried with Na2SO4 and evaporated underreduced pressure, and the resulting oil residue was purified by flash column chromatography (SiO2)eluting with dichloromethane and methanol with 1% of acetic acid

As the rapid development of chemical substances, we look forward to future research findings about 673-06-3

Reference£º
Article; ?ula, Ale?; B?dziak, Izabela; Kikelj, Danijel; Ila?, Janez; Marine Drugs; vol. 16; 11; (2018);,
Chiral Catalysts
Chiral catalysts – SlideShare

trans-Cyclohexane-1,2-diamine, cas is 1121-22-8, it is a common heterocyclic compound, the chiral-catalyst compound, its synthesis route is as follows.,1121-22-8

General procedure: To a mortar were added 3,5-di-tert-butyl-2-hydroxybenzaldehyde (0.468 g, 2 mmol) and trans-cyclohexane-1,2-diamine (0.114 g,0.123 mL, 1 mmol), and these were mixed over 10 min. The product was recrystallized (CH2Cl2/EtOH 1:9) to give 1a as a bright yellow solid; yield: 0.487 g (89%).

As the rapid development of chemical substances, we look forward to future research findings about 1121-22-8

Reference£º
Article; Civicos, Jose F.; Coimbra, Juliana S. M.; Costa, Paulo R. R.; Synthesis; vol. 49; 17; (2017); p. 3998 – 4006;,
Chiral Catalysts
Chiral catalysts – SlideShare

1121-22-8, trans-Cyclohexane-1,2-diamine is a chiral-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: To a mortar were added 3,5-di-tert-butyl-2-hydroxybenzaldehyde (0.468 g, 2 mmol) and trans-cyclohexane-1,2-diamine (0.114 g,0.123 mL, 1 mmol), and these were mixed over 10 min. The product was recrystallized (CH2Cl2/EtOH 1:9) to give 1a as a bright yellow solid; yield: 0.487 g (89%)., 1121-22-8

The synthetic route of 1121-22-8 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Civicos, Jose F.; Coimbra, Juliana S. M.; Costa, Paulo R. R.; Synthesis; vol. 49; 17; (2017); p. 3998 – 4006;,
Chiral Catalysts
Chiral catalysts – SlideShare

trans-Cyclohexane-1,2-diamine, cas is 1121-22-8, it is a common heterocyclic compound, the chiral-catalyst compound, its synthesis route is as follows.,1121-22-8

A solution of thiazole-2-carboxaldehyde (2.00 g, 17.7 mmol) in N,N-dimethylformamide (4.0 mL) was swirled as trans-N,N’-1,2-diaminocyclohexane (1.05 mL, 8.74 mmol) was added, which resulted in slight warming. After three days at ambient temperature, yellowish crystals were collected by filtration, rinsed with N,N-dimethylformamide (10 mL, in portions) and water (10 mL, in portions), and dried in vacuo (trans-N,N’-bis(thiazol-2-ylmethylene)-1,2-diaminocyclohexane, 1.91 g). After three days, a second crop of yellowish crystals was likewise collected from the initial filtrate (trans-N,N’-bis(thiazol-2-ylmethylene)-1,2-diaminocyclohexane, 0.33 g, 84.3% total yield). 1H NMR (CDCl3, delta): 8.36 (d, J = 0.8, 2H, imine), 7.81 (d, J = 3.2, 2H, Thz), 7.31 (dd, J = 3.2, 0.8, 2H, Thz), 3.48 (m, 2H, NCH), 1.84 (m, 4H, cyclohexyl), 1.79 (m, 2H, cyclohexyl), 1.47 (m, 2H, cyclohexyl). 13C NMR (CDCl3, delta): 167.1 (Thz 2), 154.7 (Thz 4,5), 143.8 (Thz 4,5), 121.3 (imine), 73.1 (NCH), 32.4 (cyclohexyl), 24.1 (cyclohexyl). Anal. Calc. for C14H16N4S: C, 55.23; H, 5.30; N, 18.40. Found: C, 55.29; H, 5.55; N, 18.37%.

As the rapid development of chemical substances, we look forward to future research findings about 1121-22-8

Reference£º
Article; Bennov, Rachel R.; Berko, David A.; Burgess, Samantha A.; Dimeglio, John L.; Kalman, Steven E.; Ludlum, Jeffrey M.; Nash, Bradley W.; Palomaki, Peter K.B.; Perlow, Daniel B.; Rubin, Jacob A.; Saunders, Janet E.; Scarselletta, Sarah V.; Kastner, Margaret E.; Pike, Robert D.; Sabat, Michal; Keane, Joseph M.; Inorganica Chimica Acta; vol. 438; (2015); p. 64 – 75;,
Chiral Catalysts
Chiral catalysts – SlideShare

673-06-3, D-Phenylalanine is a chiral-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

673-06-3, General procedure: L-Phenylalanine (1.5 g, 9.08 mmol, 1eq.) was suspended in 30 mL of NaOH (0.39 g, 9.98 mmol, 1.1 eq.) solution and the reaction mixture was diluted with tert-butanol. To this, di-tert-butyl pyrocarbonate (2.63 mL, 10.89 mmol, 1.2 eq) was added drop-wise with constant stirring. Reaction mixture was stirred at room temperature for overnight. Next day the reaction mixture was extracted with pentane and the organic phase is extracted with saturated NaHCO3 solution (315 mL). The combined aqueous layer was acidified to pH 2 with 1N HCl solution. The acidified layer was extracted with ethyl acetate (3×25 mL) and washed with brine solution (2×15 mL). The organic layer was dried over anhydrous sodium sulphate and concentrated to give the product (2.1 g, 87.5 % yield)

The synthetic route of 673-06-3 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Kumar, Vikas; Krishna, K. Vijaya; Khanna, Shruti; Joshi, Khashti Ballabh; Tetrahedron; vol. 72; 35; (2016); p. 5369 – 5376;,
Chiral Catalysts
Chiral catalysts – SlideShare

A common heterocyclic compound, the chiral-catalyst compound, name is trans-Cyclohexane-1,2-diamine,cas is 1121-22-8, mainly used in chemical industry, its synthesis route is as follows.,1121-22-8

Toa solution of trans-1,2-diaminocyclohexane(20.4 mL, 0.170 mol) in N,N-dimethylformamide(82 mL) was added 2-pyridinecarboxaldehyde (35.6 mL, 0.375 mol) with moderateswirling, resulting in moderate warming.After 24 hours, crystals were collected by fitration, rinsed with N,N-dimethylformamide (75 mL) and water(100 mL), and dried in vacuo (trans-N,N?-bis(pyridin-2-ylmethylene)-1,2-diaminocyclohexane, 40.52 g,81.5%, spectra matching those reported).ADDIN EN.CITESchoumacker20031607[1]1607160717Schoumacker,S.Hamelin, O.Pecaut,J.Fontecave,M.CatalyticAsymmetric Sulfoxidation by Chiral Manganese Complexes: Acetylacetonate Anions as ChiralitySwitchesInorg.Chem.Inorg.Chem.8110-8116422003[1] Amixture of trans-N,N?-bis(pyridin-2-ylmethylene)-1,2-diaminocyclohexane (30.13 g,0.1030 mol) and sodium borohydride (12.04 g, 0.3183 mol) in ethanol (95%, 760mL) was stirred vented to an oil bubbler for three days. The mixture was chilled in an ice-water bathfor 1 hour, and hydrochloric acid (12 M, 55 mL) was added in portions, and theresulting solution was confirmed to be acidic.Solvent was removed by rotary evaporation, and the resulting stickysolid was dissolved in water (300 mL) and washed with methylene chloride (3 x175 mL). To the remaining aqueoussolution was added aqueous sodium hydroxide (50% by weight, 30 mL). The resulting mixture was confirmed to bebasic and left at ambient temperature to cool for 30 minutes. It was extracted with methylene chloride (3 x370 mL), and the combined organic extracts were dried for 48 hours overanhydrous sodium sulfate (15 g) and anhydrous potassium carbonate (15 g). Solids were removed by filtration, andsolvent was removed by rotary evaporation.The resulting oil was dried on a Schlenk line and placed in a -20 Cfreezer overnight. Upon warming to roomtemperature, it solidified to a waxy yellow solid (trans-N,N?-bis(pyridin-2-ylmethyl)-1,2-diaminocyclohexane,picchxn, 1, 29.88 g, 97.87%, spectramatching those reported). ADDIN EN.CITESchoumacker20031607[1]1607160717Schoumacker,S.Hamelin, O.Pecaut,J.Fontecave,M.CatalyticAsymmetric Sulfoxidation by Chiral Manganese Complexes: Acetylacetonate Anions as ChiralitySwitchesInorg.Chem.Inorg.Chem.8110-8116422003[1] trans-N,N?-bis(pyridin-2-ylmethyl)-1,2-diaminocyclohexane is typicallythe only product observed in the spectra of isolated material However, it may befurther purified by recrystallization of the tetrahydrochloride salt frommethanol/isopropanol.

As the rapid development of chemical substances, we look forward to future research findings about 1121-22-8

Reference£º
Article; Bennov, Rachel R.; Berko, David A.; Burgess, Samantha A.; Dimeglio, John L.; Kalman, Steven E.; Ludlum, Jeffrey M.; Nash, Bradley W.; Palomaki, Peter K.B.; Perlow, Daniel B.; Rubin, Jacob A.; Saunders, Janet E.; Scarselletta, Sarah V.; Kastner, Margaret E.; Pike, Robert D.; Sabat, Michal; Keane, Joseph M.; Inorganica Chimica Acta; vol. 438; (2015); p. 64 – 75;,
Chiral Catalysts
Chiral catalysts – SlideShare

A common heterocyclic compound, the chiral-catalyst compound, name is D-Phenylalanine,cas is 673-06-3, mainly used in chemical industry, its synthesis route is as follows.,673-06-3

General procedure: Amino acid or peptide (1 mmol) was added with stirring to a solution of guanidine hydrochloride (15 mol%) and di-tert-butyl dicarbonate (2.5-3 mmol) in EtOH (1 mL), at 35-40C. The reaction mixture was continued to stir until a clear solution was obtained. EtOH was evaporated under vacuum and the residue was successively washed with water (2 mL) and hexane or petroleum ether (2 mL) to afford almost pure N-Boc amino acids or N-Boc peptides. If necessary, the crude products could be recrystallized for further purification.

As the rapid development of chemical substances, we look forward to future research findings about 673-06-3

Reference£º
Article; Jahani, Fatemeh; Tajbakhsh, Mahmood; Golchoubian, Hamid; Khaksar, Samad; Tetrahedron Letters; vol. 52; 12; (2011); p. 1260 – 1264;,
Chiral Catalysts
Chiral catalysts – SlideShare

1121-22-8, trans-Cyclohexane-1,2-diamine is a chiral-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: Aldehyde (2.2 mmol, salicylaldehyde or 4-methoxysalicylaldehyde, 4-diethylamino-2-hydroxy benzaldehyde or 2,4-dihydroxybenzaldehyde) was dissolved in ethanol (30 ml) and stirred at room temperature. To this solution, either ethylene diamine (1 mmol) or trans-1,2-diaminocyclohexane (1 mmol) was added drop-wise under stirring. The immediate appearance of yellow colour indicates the formation of Schiff bases. The solution was allowed to stir for another 6 h at room temperature that produced yellow to light yellow coloured precipitates. The formed precipitate was filtered off, washed with ethanol and dried under vacuum.

1121-22-8, 1121-22-8 trans-Cyclohexane-1,2-diamine 43806, achiral-catalyst compound, is more and more widely used in various fields.

Reference£º
Article; Hariharan; Anthony, Savarimuthu Philip; Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy; vol. 136; PC; (2015); p. 1658 – 1665;,
Chiral Catalysts
Chiral catalysts – SlideShare