Tag: M.W:100-200

The chiral-catalyst compound, name is D-Phenylalanine,cas is 673-06-3, mainly used in chemical industry, its synthesis route is as follows.,673-06-3

Embodiment 1 N-(Benzyloxycarbonyl)-D-phenylalanine A 15.0 g sample of D-phenylalanine was dissolved in 45 ml of aqueous solution containing 7.26 g of 50% sodium hydroxide. This solution was stirred at 0-10 C. as 16.3 g of benzyl chloroformate was added rapidly in portions. The resulting reaction was mildly exothermic, and shortly after addition, solids precipitated. An additional 45 ml of water and 3.63 g of 50% sodium hydroxide were added, causing most of the solids to redissolve. The reaction mixture was stirred for 20 minutes and then acidified with 6N hydrochloric acid. The resulting solids were filtered, washed with water and then with hexane, and dried by suction and then under vacuum to give 47 g of white solids. These solids dissolved in ether were washed twice with 1N hydrochloric acid and then with water, dried over MgSO4 and stripped to 35 C. at 2.5 mm Hg to give 27.7 g of the desired product as a colorless oil.

As the rapid development of chemical substances, we look forward to future research findings about 673-06-3

Reference£º
Patent; Shell Oil Company; US4560515; (1985); A;,
Chiral Catalysts
Chiral catalysts – SlideShare

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1121-22-8,trans-Cyclohexane-1,2-diamine,as a common compound, the synthetic route is as follows.

Reference Example 35 Production of (2RS,4aSR,8aSR)-2-ethyldecahydroquinoxaline Relative confi uration Dichloro(pentamethylcyclopentadienyl)iridium (III) dimer (70 mg, 0.090 mmol) and sodium bicarbonate (73 mg, 0.87 mmol) were added to an aqueous (20 mL) solution of trans-cyclohexane-l,2-diamine (2.00 g, 17.5 mmol) and (¡À)-l,2-butanediol (1.69 mL, 18.4 mmol) with stirring at room temperature. Degassing and argon substitution were repeated 3 times, and the mixture was then stirred for 24 hours under reflux. The reaction mixture was concentrated under reduced pressure. The obtained residue was purified by basic silica gel column chromatography (methylene chloride/methanol) to obtain (2R*,4aS*,8aS*)-2- ethyldecahydroquinoxaline (2.03 g, yield: 69%) in a yellow solid form. 1H-NMR(CDCl3)5ppm : 0.92 (3H, t, J = 7.5 Hz), 1.10-1.60 (7H, m), 1.64-1.83 (5H, m), 2.16- 2.31 (2H, m), 2.44 (IH, dd, J = 11.5, 10.4 Hz), 2.58-2.67 (1H, m), 3.02 (1H, dd, J = 11.5, 2.7 Hz)., 1121-22-8

The synthetic route of 1121-22-8 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; OTSUKA PHARMACEUTICAL CO., LTD.; SHINOHARA, Tomoichi; SASAKI, Hirofumi; TAI, Kuninori; ITO, Nobuaki; WO2013/137479; (2013); A1;,
Chiral Catalysts
Chiral catalysts – SlideShare

A common heterocyclic compound, the chiral-catalyst compound, name is trans-Cyclohexane-1,2-diamine,cas is 1121-22-8, mainly used in chemical industry, its synthesis route is as follows.,1121-22-8

Into a solution containing 1,6-diisocyanatohexane (2.35 grams, 13.95 mmol; obtained from Sigma-Aldrich Fine Chemicals) and anhydrous hexane (100 mL, obtained from Sigma-Aldrich Fine Chemicals) stirring at room temperature was added diethylene glycol butyl ether (2.27 grams, 14.0 mmol, obtained from Sigma-Aldrich Fine Chemicals), which was previously dried over calcium chloride granules, and dibutyltin dilaurate as catalyst (0.095 grams, 0.15 mmol, obtained from Sigma-Aldrich Fine Chemicals). The mixture was stirred and heated to an internal temperature of about 45 C. The progress of the reaction was monitored by 1H-NMR spectroscopy for the consumption of the diethylene glycol butyl ether starting material. The mixture was cooled to about 15 C. internal temperature; thereafter, to this mixture was added dropwise a solution of trans-1,2-diaminocyclohexane (0.80 grams, 7.0 mmol; obtained as a racemic mixture of (1R,2R and (1S,2S) stereoisomers from Sigma-Aldrich Fine Chemicals) dissolved in anhydrous hexane (20 mL). The mixture was stirred for about 30 minutes while warming up to room temperature, and FTIR spectroscopic analysis of a reaction sample indicated no unreacted isocyanate (peak at 2180 cm-1, sample prepared as a KBr pellet). The crystalline product was isolated by vacuum filtration on filter paper, rinsed with hexane, and then dried in air to give 4.82 grams of a white powder (88.8% yield). The product was believed to be of the formulae 1H-NMR spectroscopic analysis of the solid was performed in DMSO-d6 (300 MHz) at 80 C. and indicated the above structure with the following assigned peaks: 0.90 ppm (multiplet, 3 H integration, -OCH2CH2OCH2CH2OCH2CH2CH2CH3); 1.05-1.95 ppm (broad multiplets, 16 H integration, 4 methylene protons from butyl ether terminus, 8 methylene protons from the 1,6-diisocyanatohexane portion, and 4 methylene protons from the cyclohexane ring portion); 3.0 ppm (narrow multiplet, 5 H integration, -NH(CO)NHCH2(CH2)4CH2NH(CO)O and also tertiary methine proton adjacent to urea group on cyclohexane ring); 3.40-3.70 ppm (multiplets, 8 H integration, NH(CO)OCH2CH2OCH2CH2OCH2CH2CH2CH3); 4.10 ppm (singlet, 2 H integration, NH(CO)OCH2CH2OCH2CH2OCH2CH2CH2CH3); 5.60 ppm and 5.70 ppm (each a broad singlet, 1 H integration, urea NH protons); 6.75 ppm (broad singlet, 1 H integration, urethane NH proton). Elemental analysis calculated for C: 58.83%, H: 9.54%, N: 10.83%; found for C: 58.81%, H: 9.58%, N: 12.17%.

As the rapid development of chemical substances, we look forward to future research findings about 1121-22-8

Reference£º
Patent; Xerox Corporation; US2006/122415; (2006); A1;,
Chiral Catalysts
Chiral catalysts – SlideShare

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.673-06-3,D-Phenylalanine,as a common compound, the synthetic route is as follows.

673-06-3, EXAMPLE 1 (R)-2-Bromo-3-phenylpropanoic Acid Sodium nitrite (27 g in water) is added at 0 C. to a solution of D-phenylalanine (40 g) in a mixture of 48% hydrobromic acid/water (1:1 by volume). The mixture is stirred for 30 minutes at 0 C. and then for 2 hours 30 minutes at a temperature close to 0 C. The reaction mixture is extracted with ether. The organic extracts are washed with water and a saturated sodium chloride solution and then dried over sodium sulphate. After filtration and concentration to dryness, the obtained residue is purified by distillation. (R)-2-Bromo-3-phenylpropanoic acid (33 g) is obtained which has the following characteristics: B.p.1kPa =154 C.; Rf =0.47 (methylene chloride/methanol). The yield is 60%.

As the paragraph descriping shows that 673-06-3 is playing an increasingly important role.

Reference£º
Patent; Institut National de la Sante et de la Recherche Medicale (INSERM); US5591891; (1997); A;,
Chiral Catalysts
Chiral catalysts – SlideShare

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1121-22-8,trans-Cyclohexane-1,2-diamine,as a common compound, the synthetic route is as follows.

[0444] This ligand has been described by Van Stein, G C; Van Loten, G; Vrieze, K, Inorg. Chem 1985, 24 (9), 1367-1375. [0445] 19.36 g of anhydrous magnesium sulphate (161.1 mmoles) and 6.44 ml of rac-trans-1,2-diaminocyclohexane (53.6 mmoles) were successively added to a solution of 10 ml of 2-thienylaldehyde (107.1 mmoles) in 75 ml of absolute ethanol. [0446] The reaction mixture was stirred for 16 hours at ambient temperature (the solution thickened very rapidly), heated for 2 hours under reflux then filtered through a frit. [0447] The isolated solid was washed with dichloromethane. [0448] The total filtrate was concentrated completely under reduced pressure to isolate a brown solid which was re-crystallised from ethanol. [0449] 14.0 g of beige crystals were obtained, corresponding to a yield of 86%. [0450] The characteristics were as follows: [0451] M.Pt: 173-175 C. (EtOH); [0452] 1H NMR/CDCl3: delta 8.27 (s, 2H, H7,14), 7.27 (m, 2H, H, 2), 7.14 (m, 2H, H5,16), 6.96 (m, 2H, H3,4), 3.32 (m, 2H, H8,13), 1.82 (m, 6H, H10,11 and H carried by carbons 9 and 12 located in the position cis (or trans) with respect to the adjacent nitrogen atoms), 1.44 (m, 2H, H carried by carbons 9 and 12 located in the trans (or cis) position with respect to the adjacent nitrogen atoms). [0453] 13C NMR/CDCl3: delta 154.32 (C7 and C14), 142.54 (C6 to C15), 130.09 (C1 and C2), 128.20 (C5 and C16), 127.18 (C3 and C4), 73.38 (C8 and C13), 32.83 (C9 and C12), 24.44 (C10 and C11).

1121-22-8, 1121-22-8 trans-Cyclohexane-1,2-diamine 43806, achiral-catalyst compound, is more and more widely used in various fields.

Reference£º
Patent; Cellier, Pascal Philippe; Cristau, Henri-Jean; Spindler, Jean-Francis; Taillefer, Marc; US2003/236413; (2003); A1;,
Chiral Catalysts
Chiral catalysts – SlideShare

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1121-22-8,trans-Cyclohexane-1,2-diamine,as a common compound, the synthetic route is as follows.

A solution of thiazole-2-carboxaldehyde (2.00 g, 17.7 mmol) in N,N-dimethylformamide (4.0 mL) was swirled as trans-N,N’-1,2-diaminocyclohexane (1.05 mL, 8.74 mmol) was added, which resulted in slight warming. After three days at ambient temperature, yellowish crystals were collected by filtration, rinsed with N,N-dimethylformamide (10 mL, in portions) and water (10 mL, in portions), and dried in vacuo (trans-N,N’-bis(thiazol-2-ylmethylene)-1,2-diaminocyclohexane, 1.91 g). After three days, a second crop of yellowish crystals was likewise collected from the initial filtrate (trans-N,N’-bis(thiazol-2-ylmethylene)-1,2-diaminocyclohexane, 0.33 g, 84.3% total yield). 1H NMR (CDCl3, delta): 8.36 (d, J = 0.8, 2H, imine), 7.81 (d, J = 3.2, 2H, Thz), 7.31 (dd, J = 3.2, 0.8, 2H, Thz), 3.48 (m, 2H, NCH), 1.84 (m, 4H, cyclohexyl), 1.79 (m, 2H, cyclohexyl), 1.47 (m, 2H, cyclohexyl). 13C NMR (CDCl3, delta): 167.1 (Thz 2), 154.7 (Thz 4,5), 143.8 (Thz 4,5), 121.3 (imine), 73.1 (NCH), 32.4 (cyclohexyl), 24.1 (cyclohexyl). Anal. Calc. for C14H16N4S: C, 55.23; H, 5.30; N, 18.40. Found: C, 55.29; H, 5.55; N, 18.37%., 1121-22-8

As the paragraph descriping shows that 1121-22-8 is playing an increasingly important role.

Reference£º
Article; Bennov, Rachel R.; Berko, David A.; Burgess, Samantha A.; Dimeglio, John L.; Kalman, Steven E.; Ludlum, Jeffrey M.; Nash, Bradley W.; Palomaki, Peter K.B.; Perlow, Daniel B.; Rubin, Jacob A.; Saunders, Janet E.; Scarselletta, Sarah V.; Kastner, Margaret E.; Pike, Robert D.; Sabat, Michal; Keane, Joseph M.; Inorganica Chimica Acta; vol. 438; (2015); p. 64 – 75;,
Chiral Catalysts
Chiral catalysts – SlideShare

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.673-06-3,D-Phenylalanine,as a common compound, the synthetic route is as follows.

673-06-3, To the suspension of D-phenylalanine (1 g, 6 mmol) in 25 mL water at room temperature, NaOH (0.72 g, 18 mmol) and p-toluenesulfonyl chloride (1.37 g, 7.2 mmol) were added. The mixture was stirred at 60 C for 6 h. Acid base washed method was used to collect product from the reaction mixture. 3MConc. HCl and EtOAc were added to the reaction mixture.The starting material (D-phenylalanine) was protonated and shifted to the aqueous phase and product was shifted to the organic phase at pH = 1. Product was then deprotonated by adding by adding 2M NaOH aqueous solution to the organic phase and it was come back to the aqueous phase at pH =11-12. At the end, product was protonated by adding 3M HCland was collected in organic phase. The organic phase is washed with brine, dried with MgSO4 and product was obtained (1.80 g, 95 %) by evaporating the solvent.

The synthetic route of 673-06-3 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Ali, Zulfiqar; Gilani, Syeda Rubina; Hussain, Habib; Hussain, Imdad; Asian Journal of Chemistry; vol. 26; 20; (2014); p. 6733 – 6736;,
Chiral Catalysts
Chiral catalysts – SlideShare

The chiral-catalyst compound, cas is 1121-22-8 name is trans-Cyclohexane-1,2-diamine, mainly used in chemical industry, its synthesis route is as follows.,1121-22-8

General procedure: To a mortar were added 3,5-di-tert-butyl-2-hydroxybenzaldehyde (0.468 g, 2 mmol) and trans-cyclohexane-1,2-diamine (0.114 g,0.123 mL, 1 mmol), and these were mixed over 10 min. The product was recrystallized (CH2Cl2/EtOH 1:9) to give 1a as a bright yellow solid; yield: 0.487 g (89%).

As the rapid development of chemical substances, we look forward to future research findings about 1121-22-8

Reference£º
Article; Civicos, Jose F.; Coimbra, Juliana S. M.; Costa, Paulo R. R.; Synthesis; vol. 49; 17; (2017); p. 3998 – 4006;,
Chiral Catalysts
Chiral catalysts – SlideShare

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1121-22-8,trans-Cyclohexane-1,2-diamine,as a common compound, the synthetic route is as follows.

General procedure: Salen ligands were obtained in the stoichiometric reaction of salicylic aldehyde and trans-1,2-diaminocyclohexane in 96% ethanol solution according to [13c]. Reactions were carried out in 50 ml three-neck round-bottomed flask, equipped with reflux condenser, dropping funnel, magnetic stirrer and heating mantle. The solution of trans-1,2-diaminocyclohexane (0,57 ml, 5 mmol) in EtOH (10 ml) was slowly added to a hot solution of appropriate aldehyde (10 mmol) in EtOH (20 ml). The reaction mixture was heated at reflux for 1.5 h. After cooling to room temperature, the yellow precipitate that formed was filtered off and washed with cold EtOH (5 ml). The ligands were used without further purification. (¡À)-trans-N,N-bis(3,5-di-tert-butylsalicylidene)-1,2-cyclo-hexanediamine (H2salcn(2Bu)) (H2salcn(BuOMe)) Anal. Calc. for C36H54N2O2: C, 79.07%; H, 9.95%; N, 5.12%; C/N = 15.44. Found: C, 78.98%; H, 10.25%; N, 5.17%; C/N = 15.27. 1H-NMR (CDCl3): delta = 13.70 (bs, 2H), 8.29 (s, 2H), 7.29 (d, J = 2.40 Hz, 2H), 6.97 (d, J = 2.30 Hz, 2H), 3.31 (m, 2H), 1.94 (m, 2H), 1.87 (m, 2H), 1.73 (m, 2H), 1.47 (m, 2H), 1.40 (s, 18H), 1.23 (s, 18H). Yield: 2.19 g, 80%, mp = 178-181 C.

1121-22-8, 1121-22-8 trans-Cyclohexane-1,2-diamine 43806, achiral-catalyst compound, is more and more widely used in various fields.

Reference£º
Article; Tomczyk; Nowak; Bukowski; Bester; Urbaniak; Andrijewski; Olejniczak; Electrochimica Acta; vol. 121; (2014); p. 64 – 77;,
Chiral Catalysts
Chiral catalysts – SlideShare

673-06-3, D-Phenylalanine is a chiral-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

EXAMPLE 89 (2R)-2-Hydroxy-3-phenylpropanoic acid (J. Med. Chem., 23, 666) Following the procedure of Johnson, 1980, D-phenylalanine (16.5 g, 100 mmol) was dissolved in 1N H2 SO4 (150 ml) and cooled to 0 C. A solution of NaNO2 (10.5 g, 150 mmol) in water (50 ml) was added dropwise. The mixture was stirred for 2 h at 0 C. and for 3 h at 25 C. The product was extracted into ether (5*100 ml) and the combined ether extracts were dried over Na2 SO4 and concentrated in vacuo to about 100 ml. Hexane (300 ml) was added and the product which crystallized out was collected by vacuum filtration to afford the title compound as a colorless solid (9 g, 54%); mp=124-125 C., 673-06-3

673-06-3 D-Phenylalanine 71567, achiral-catalyst compound, is more and more widely used in various fields.

Reference£º
Patent; Abbott Laboratories; US5164388; (1992); A;,
Chiral Catalysts
Chiral catalysts – SlideShare